Re: Installer login broken (ncurse?)
:If it is of any use, I get this messages in dmesg just by booting:
:
:WARNING: #da/0x20008 si_iosize_max=0, using DFLTPHYS.
:WARNING: #da/0x2000b si_iosize_max=0, using DFLTPHYS.
:WARNING: #da/0x2000c si_iosize_max=0, using DFLTPHYS.
:WARNING: #da/0x2000d si_iosize_max=0, using DFLTPHYS.
:WARNING: #da/0x2000e si_iosize_max=0, using DFLTPHYS.
:
:one for every filesystem, I guess.
:
:A 'fdisk da1' as root adds this to dmesg:
:
:WARNING: da1 si_iosize_max=0, using DFLTPHYS.
:
:I hope it's just some diagnostics.
:
:J^2
Yup, ignore them. The device is supposed to set the max transfer
based on e.g. DMA chain or array limitations, but most do not so the
default is used.
-Matt
Matthew Dillon
<dillon@backplane.com>
討論串 (同標題文章)
完整討論串 (本文為第 23 之 29 篇)：