Re: Installer login broken (ncurse?)
On Mar 21, 2005, at 10:52 PM, Matthew Dillon wrote:
> :..
> :>
> :> Should be an *active* terminator - and probably is such.
> :
> :Not sure, it's just a little black box with a 68 pin connector.
> :When I think about it, it makes sense, passive terminators
> :is a thing of the past, SCSI 2 might be the last standard
> :that used them, do you know exactly when they disappeared?
>
> Active terminators typically have an LED. on them (supplied through
> the cable) so you know they have power. Without power the
> terminator
> will not work properly. I never buy active terminators unless
> they have
> an LED. Note, however, that I haven't messed around with SCSI for
> a couple of years, so things may have changed.
It's a terminator that was shipped with a controller,
probably the cheapest on on the market.
>
> :DILLON, COMMIT THAT LITTLE PATCH YOU POSTED
> :A FEW HOURS AGO, I'M INSTALLING DFly ON MY
> :SCSI DISK RIGHT NOW!!!!!!!!!!!
> :
> :BTW, DFly's installer kicks FBSD's somewhere it hurts ;-)
> :
> :J^2
>
> Now that is good news! A shot in the dark actually workked the
> first
> time!
>
If it is of any use, I get this messages in dmesg just by booting:
WARNING: #da/0x20008 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x2000b si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x2000c si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x2000d si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x2000e si_iosize_max=0, using DFLTPHYS.
one for every filesystem, I guess.
A 'fdisk da1' as root adds this to dmesg:
WARNING: da1 si_iosize_max=0, using DFLTPHYS.
I hope it's just some diagnostics.
J^2
討論串 (同標題文章)
完整討論串 (本文為第 22 之 29 篇)：