Re: Installer login broken (ncurse?)

看板DFBSD_bugs作者時間21年前 (2005/03/22 02:32), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串14/29 (看更多)
On Mar 21, 2005, at 12:21 AM, Bill Hacker wrote: > Matthew Dillon wrote: > >> :> Hmm. You are getting a request timeout. Have you ever >> installed >> :> DragonFly on this box before, or made any hardware changes :> >> recently? >> :> Is it something that worked before but does not work now? >> : >> :This is a first attempt to install dfly on this machine. >> : >> :I just thought it would be interesting to see dfly >> :running on a dual opteron machine. >> : >> :Can it be some kind of problem with shared interrupts, >> :and if so, how do I check it? >> : >> :J^2 > *SNIP* >> If this patch doesn't do it we may be S.O.L. until a developer >> can get >> his hands on a similar system and figure out what the problem is. >> If >> the FreeBSD CD can talk to it then its likely to be related to >> interrupt routing (we are somewhat behind in that area). >> -Matt >> Matthew Dillon <dillon@backplane.com> > > Jason, > > Not sure about your MB, but I have a large number of different SCSI > controllers O/H here... Good for you. I only owns 3 SCSI controllers. Way too few ;-) > Is your SCSI controller embedded on the MB or separate? <BRAG> Mobo: Tyan K8W (2885) with latest bios, only a few weeks old. Dual Opteron 244, 2Gb 128bit REG ECC NUMA memory. My BIOS setting are pretty much standard, no overclocking or other tweaks. The only thing I have disabled in the BIOS is the SIL 3114 SATA controller, because disables the SCSI controller. SCSI cont: LSI 21320R dual channel, LSI 1030 chip, mpt driver, SI-5.11.01 BIOS, which I think is the latest, updated it in okt-2004. This controller is located in an 133MHz 64 bit PCI-X slot. </BRAG> 2 HD's attached, both IBM 18 Gb U160 68 pin, SCSI id 0 and 1. About 1 meter U160 cable for 4 devices with a passive terminator at the end. The controller BIOS reports the both disks are on the first channel, but DFly attaches them to mpt1, not mpt0. Trying to install DFly on the second (id 1) disk. I can format the drive and even install bootblocks on both disks that works just fine to boot Solaris, but I can't newfs the disk with DFly. J^2
文章代碼(AID): #12FnCf00 (DFBSD_bugs)
討論串 (同標題文章)
文章代碼(AID): #12FnCf00 (DFBSD_bugs)