Re: powerd and increase in energy need

>
>If you are trying to reduce power consumption, why are you limiting Cx
>states to C2 (which save little) and not C3 (which will save a LOT of
>power when the CPU is not heavily loaded).

On my previous post I forgot to set kern.hz=100. This change does lower idle
power from 71w to 62w.

With my hardware, i5-650, using C3 does not result in lower power consumption
versus C2.  Both states draw exactly the same power.

hw.acpi.cpu.cx_lowest: C3
dev.cpu.0.cx_supported: C1/3 C2/205 C3/245
dev.cpu.0.cx_lowest: C3
dev.cpu.1.cx_supported: C1/3 C2/205 C3/245
dev.cpu.1.cx_lowest: C3
dev.cpu.2.cx_supported: C1/3 C2/205 C3/245
dev.cpu.2.cx_lowest: C3
dev.cpu.3.cx_supported: C1/3 C2/205 C3/245
dev.cpu.3.cx_lowest: C3
62w idle power

hw.acpi.cpu.cx_lowest: C2
dev.cpu.0.cx_supported: C1/3 C2/205 C3/245
dev.cpu.0.cx_lowest: C2
dev.cpu.1.cx_supported: C1/3 C2/205 C3/245
dev.cpu.1.cx_lowest: C2
dev.cpu.2.cx_supported: C1/3 C2/205 C3/245
dev.cpu.2.cx_lowest: C2
dev.cpu.3.cx_supported: C1/3 C2/205 C3/245
dev.cpu.3.cx_lowest: C2
62w idle power

John Theus
TheUs Group
TheUsGroup.com
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"