Re: Fatal trap 19: non-maskable interrupt trap while in kernel m
I compiled a custom FreeBSD 5.3-RELEASE kernel without firewire support and
made custom miniinst CD. After that I successfully installed 5.3-RELEASE.
No doubt, this is a firewire problem...
$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Sun Nov 7 16:51:00 CET 2004
trey@amd64mobile.trey.hu:/usr/src/sys/i386/compile/TREY
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
real memory = 267321344 (254 MB)
avail memory = 256114688 (244 MB)
ACPI APIC Table: <PTLTD APIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.PIB_.ALKA has invalid initial irq 9, ignoring
ACPI link \\_SB_.PCI0.PIB_.ALKB has invalid initial irq 11, ignoring
ACPI link \\_SB_.PCI0.PIB_.ALKC has invalid initial irq 10, ignoring
ACPI link \\_SB_.PCI0.PIB_.ALKD has invalid initial irq 5, ignoring
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, FireWire> at device 6.0 (no driver attached)
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x1000-0x10ff mem
0xd0008800-0xd00088ff irq 19 at device 8.0 on pci0
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re0: Ethernet address: 00:90:f5:32:10:37
pci0: <bridge, PCI-CardBus> at device 12.0 (no driver attached)
pci0: <mass storage> at device 14.0 (no driver attached)
pci0: <mass storage> at device 14.1 (no driver attached)
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port
0x1c60-0x1c6f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xcf000-0xcffff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1804105912 Hz quality 800
Timecounters tick every 10.000 msec
acpi_tz0: _CRT value is absurd, ignored (154.8C)
ad0: 38154MB <FUJITSU MHT2040AT/0022> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <SAMSUNG CDRW/DVD SN-324F/U204> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
cpu0: Performance states changed
acpi_tz0: _CRT value is absurd, ignored (154.8C)
cpu0: Performance states changed
acpi_tz0: _CRT value is absurd, ignored (154.8C)
$ uname -a
FreeBSD amd64mobile.trey.hu 5.3-STABLE FreeBSD 5.3-STABLE #1: Sun Nov 7
16:51:00 CET 2004
trey@amd64mobile.trey.hu:/usr/src/sys/i386/compile/TREY i386
I will try to install DragonFly without firewire.
討論串 (同標題文章)
完整討論串 (本文為第 17 之 24 篇)：