Re: Fatal trap 19: non-maskable interrupt trap while in kernel m
Matthew Dillon 甏ta:
> If it doesn't work there's one more thing I can try that is a bit more
> iffy. I'm hoping the current patch does the trick.
Sorry, don't work... same error.. If you have another idea i'm ready for
testing :-)
Can I disable somehow firewire initializization process during boot? Or can
i find somewhere ISO with spec kernel that not contain firewire support (i
mean failsafe kernel).
Thanks.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -Dh
/modules/acpi.ko text=0x42ab8 data=0x1cd4+0x878 syms=[0x4+0x6630+0x4+0x7f56]
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.1-Stable #0: Fri Nov 5 14:44:54 PST 2004
root@:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1804069818 Hz, i8254 clock: 1193168 Hz
CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ (1804.10-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory = 267321344 (261056K bytes)
avail memory = 249200640 (243360K bytes)
Preloaded elf kernel "/kernel" at 0xc0662000.
Preloaded elf module "/modules/acpi.ko" at 0xc066221c.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
installed MI handler for int 10
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x66,0x62 on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0
on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4e50 graphics accelerator> at 0.0 irq 9
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
0xd0000000-0xd0003fff,0xd0008000-0xd00087ff irq 11 at device 6.0 on pci0
installed MI handler for int 11
fwohci0: OHCI version 1.10 (ROM=1)
NMI ISA a1, EISA ff
RAM parity error, likely hardware failure.
Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer = 0x8:0xc01e3d8e
stack pointer = 0x10:0xc0684c24
frame pointer = 0x10:0xc0684c44
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, IOPL = 0
current process = 0 (swapper)
current thread = pri 12
interrupt mask = net tty bio cam
kernel: type 19 trap, code=0
Stopped at fwohci_init+0x14a: movl %ecx,%edi
db> tr
fwohci_init(d9a20000,c604af18) at fwohci_init+0x14a
fwohci_pci_attach(c604af18,c604af18,c604ae40,c0684cb4,0) at
fwohci_pci_attach+0x1eb
device_probe_and_attach(c604af18) at device_probe_and_attach+0xf2
bus_generic_attach(c604ae40,c604ae40,0,5c,c6049fa0) at
bus_generic_attach+0x16
pci_attach(c604ae40,c604ae40,c6049fa0,0,1) at pci_attach+0xb3
device_probe_and_attach(c604ae40) at device_probe_and_attach+0xf2
bus_generic_attach(c6049fa0,c6049fa0,c04b85d8,0,c6049fa0) at
bus_generic_attach+0x16
nexus_pcib_attach(c6049fa0,c6049fa0,c6049ec8,0,1) at nexus_pcib_attach+0x1f
device_probe_and_attach(c6049fa0) at device_probe_and_attach+0xf2
bus_generic_attach(c6049ec8,c6049e80,c0684d5c,c026b7f6,c6049ec8) at
bus_generic_attach+0x16
nexus_attach(c6049ec8,c6049ec8,c606c6d4,68f000,1) at nexus_attach+0xd
device_probe_and_attach(c6049ec8) at device_probe_and_attach+0xf2
root_bus_configure(c6049e80,c04ad760,0,4) at root_bus_configure+0x16
configure(0,681c00,68f000,0,c013b45c) at configure+0x22
mi_startup(681000,0,0,0,0) at mi_startup+0x90
begin() at begin+0x43
db> ps
pid proc addr uid ppid pgrp flag stat wmesg wchan cmd
1 c5fdde00 c6d39da0 0 0 0 000204 1 swapper
0 c04e27c0 c0684da0 0 0 0 000204 2 swapper
cpu 0 tdrunqmask 00001000 curthread 0xc04e2940 reqflags 0002
uschedcp 0 (-1) upri 0
INCOMMING IPIQS:
tdq thread pid flags pri(act) sp wmesg comm
12 0xc6d36de0 -1 00000e02 44( 12) 0xc9745d88 - cryptoret
12 0xc6d36d00 -1 00000e02 44( 12) 0xc974ed88 - taskqueue
12 0xc6d36c20 -1 00000e02 44( 12) 0xc975bd88 - acpi_task
12 0xc6d36b40 -1 00000e02 44( 12) 0xc975ed88 - acpi_thermal
tdq thread pid flags pri(act) sp wmesg comm
32 0xff80034c -1 00000000 44( 12) 0xff807d8c - idle_0
32 0xc04e2940 0 00000001 12( 12) 0xc0684d90 - swapper
32 0xc05394f4 -1 00010c00 46( 14) 0xc0f57d88 - softclock 0
32 0xc0533220 -1 00010c00 110( 14) 0xc0f5ad88 - ithread 20
32 0xc6d36ec0 1 00000600 42( 10) 0xc6d39d3c - swapper
32 0xc0533080 -1 00010c00 110( 14) 0xc9742d88 - ithread 18
32 0xc6d36de0 -1 00000e02 44( 12) 0xc9745d88 - cryptoret
32 0xc0533150 -1 00010c00 110( 14) 0xc9748d88 - ithread 19
32 0xc05332f0 -1 00010c00 110( 14) 0xc974bd88 - ithread 21
32 0xc6d36d00 -1 00000e02 44( 12) 0xc974ed88 - taskqueue
32 0xc0532a00 -1 00010c00 124( 28) 0xc9757d88 - ithread 10
32 0xc6d36c20 -1 00000e02 44( 12) 0xc975bd88 - acpi_task
32 0xc6d36b40 -1 00000e02 44( 12) 0xc975ed88 - acpi_thermal
32 0xc0532ad0 -1 00010c00 124( 28) 0xd9a29d88 - ithread 11
CURCPU 0 CURTHREAD 0xc04e2940 (0) USCHEDCP 0 (-1) UPRI 0
db>
討論串 (同標題文章)
完整討論串 (本文為第 12 之 24 篇)：