Re: failing disk, or not?
On Wed, Mar 30, 2005 at 03:23:31AM +0800, Bill Hacker wrote:
>George Georgalis wrote:
>
>
>>>>pci0: <unknown card> (vendor=0x10de, dev=0x00e4) at 1.1 irq 10
>>>
>>>NVIDIA - nForce3 250 SMBus Controller ?
>>
>>
>>Was wondering about that too... maybe it has something to do with
>>the flash Memory Card Reader -- which I might be taking out because
>>it takes up a hd slot.
>
>I use an IDE adaptor for that - and *expect* errors when I am putting
>an OS onto a CF. They have very slow write cycle times,
>(and a finite lifetime of writes - best mounted 'noatime')
>
>But I presume yours is an empty socket at this time?
Just empty sockets, I may use for flashing cards for use in sokris, or
my camera, etc. The onboard card reader looks very much like it's on a
usb port.
>I would start by disconnecting everything not essential,
>see if the problem goes away - or at least changes...
really? the box has been pretty stable. Only noticed write errors with
big writes (copying dvd), and they don't seem fatal. I was hoping the
device id could just be added so it uses an appropriate api vs whatever
generic bios ide calls are happening.
....more in another followup to Matt...
// George
--
George Georgalis, systems architect, administrator Linux BSD IXOYE
http://galis.org/george/ cell:646-331-2027 mailto:george@galis.org
討論串 (同標題文章)
完整討論串 (本文為第 8 之 12 篇)：