Re: failing disk, or not?
George Georgalis wrote:
>>>pci0: <unknown card> (vendor=0x10de, dev=0x00e4) at 1.1 irq 10
>>
>>NVIDIA - nForce3 250 SMBus Controller ?
>
>
> Was wondering about that too... maybe it has something to do with
> the flash Memory Card Reader -- which I might be taking out because
> it takes up a hd slot.
I use an IDE adaptor for that - and *expect* errors when I am putting
an OS onto a CF. They have very slow write cycle times,
(and a finite lifetime of writes - best mounted 'noatime')
But I presume yours is an empty socket at this time?
>>I'm puzzled:
>>
>>- ata0-master claims /dev/ad0
>>
>>- ata1-master claims /dev/acd0
>>
>>- ata2-master claims /dev/ad4
>>
>>- ata3 seems empty...
>>
>>So how do we skip /dev/ad1, /dev/ad2, and /dev/ad3 to arive at /dev/ad4?
>
>
> there is a cdrom drive on one of the primary or secondary ide channels,
Above, ata1 master.
> an ata disk hanging outside (on the other channel)
ata0?
> and the primary
> disk is on an sata controler,
ata2?
> the flash memory slots appear as drives
> (without media) as well.
OK - w/o media they should be skipped, just as an unconnected cable
woudl be.
> The ordering in bios is default. if that helps
ACK.
>>>Mounting root from ufs:/dev/ad4s3a
>>You are on slice2, presumably well up in the cylinder count.
>
> well, slice 3 if you count from 1, I'm never completely sure.
ACK.. '/dev/ad4s3a' Mea Culpa...
I would start by disconnecting everything not essential,
see if the problem goes away - or at least changes...
Bill
討論串 (同標題文章)
完整討論串 (本文為第 7 之 12 篇)：