Re: Problem intr11 livelocked
:On Wed, Mar 02, 2005 at 09:34:10PM +0100, Jonathan Buschmann wrote:
:...
:> All i can say is that your right it's the ICH5 the problem (the ATA part
:> only ?)
:
:I created an ISO that added the PCI ID to the interrupt handler for
:this ATA port and Jonathan reported that the 'livelocked' message went
:away. Here's the patch (note that the ICH6 references are from a
:previous patch).
:
:cvs server: /home/dcvs/CVSROOT/config: unrecognized keyword 'LocalKeyword'
:Index: ata-pci.c
:===================================================================
:RCS file: /home/dcvs/src/sys/dev/disk/ata/ata-pci.c,v
:retrieving revision 1.17
:diff -u -r1.17 ata-pci.c
:--- ata-pci.c 1 Sep 2004 14:13:55 -0000 1.17
:+++ ata-pci.c 8 Mar 2005 16:28:19 -0000
:@@ -684,6 +684,9 @@
: break;
:
: case 0x24d18086: /* Intel ICH5 SATA150 */
:+ case 0x24db8086: /* Intel ICH5 ATA100 */
:+ case 0x26518086: /* Intel ICH6 SATA150 */
:+ case 0x26528086: /* Intel ICH6R SATA150 */
:--
:Chuck Tuffli
:Agilent Technologies
Ok. You submitted a similar patch January 31st. Joerg was
going to do something with it back then but must have forgotten :-)
I'll commit it. It probably isn't entirely correct but eventually we
are going to have to bring in the latest ATA driver from FreeBSD anyhow,
so I am not going to worry about it changes that might not entirely work,
but wouldn't have worked at all before for those device ID's anyway.
-Matt
Matthew Dillon
<dillon@backplane.com>
討論串 (同標題文章)
完整討論串 (本文為第 12 之 15 篇)：