Re: Problem intr11 livelocked

看板DFBSD_bugs作者時間21年前 (2005/03/03 04:32), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串8/15 (看更多)
Bill Hacker a 嶰rit : > Jonathan Buschmann wrote: > >> Chuck Tuffli a 嶰rit : >> >>> On Mon, Feb 28, 2005 at 12:43:26PM +0100, Jonathan Buschmann wrote: >>> >>>> Hello, >>>> >>>> I've tried to install Dfly on my PC : Asus P4C800-E Deluxe - P4C >>>> 2,6Ghz - Maxtor 120Go connected to RAID Promise - Intel Gb NIC. >>> >>> >>> >>> ... >>> >>>> PS: I've tried to get dmesg or else but without network i don't know >>>> how to do it. >>> >>> >>> >>> >>> see if >>> >>> dmesg | grep 'irq 11' >>> >>> shows any unsupported PCI devices using this IRQ. Do you have another >>> NIC you can plug into the box to get the dmesg? >>> >> >> I managed to have a second nic in my PC and i've got uploaded the >> dmesg.boot file at this place : >> http://www.actitude.net/~jonthn/dmesg.boot >> >> I hope it can help. > > > Culprit appears to be the Intel IHC5 multi-function chip. > > Turn off/ disconnect its USB functions. > > Also, per my earlier direct message, disconnect/ shut off *everything* > you can, > including emptying the PCI bus of cards. > > Add back one item/function at a time after you have regained control of the > box. When the problem reappears, you will have it boxed. > > HTH, > > Bill > > At first sorry i was probably unclear ( lack in my english ) but i've currently no Dfly installed on the disk but i'm trying to install it. I've disabled all i can (USB , NIC , Audio, Serial, Parallel Port, PCI SCSI Card) Here is the dmesg and the vmstat output: http://www.actitude.net/~jonthn/dmesg.boot.all_disabled_RAID-enabled http://www.actitude.net/~jonthn/vmstat-all_disabled_RAID-enabled I've already tried with or without ACPI/RAID Promise and there is still the same problem. All i can say is that your right it's the ICH5 the problem (the ATA part only ?) JonTHn
文章代碼(AID): #129YB900 (DFBSD_bugs)
討論串 (同標題文章)
文章代碼(AID): #129YB900 (DFBSD_bugs)