Re: [問題] 關於RFIC設計的問題

看板comm_and_RF作者 (龘)時間12年前 (2012/06/13 00:03), 編輯推噓3(304)
留言7則, 3人參與, 最新討論串3/4 (看更多)
※ 引述《dlh (小金牛)》之銘言: : In LNA design,it is typically found that frequency of the S11 dip does not : agree with that of the S21 peak.Could you research on why it appears so and : if you can improve? : 小弟苦思許久 還是找不到為何有如此現象 : 請教 板上大神 : 有人可否解答 小弟爬文發現到這個問題 看推文說是跟noise match 和conjugate match有關 不過google還是沒甚麼頭緒 想請問有人能解惑一下嗎? 謝謝 -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 220.132.98.155 ※ 編輯: already310 來自: 220.132.98.155 (06/13 00:05)

06/13 22:42, , 1F
S11最低點<=>Zin最接近50ohm的點
06/13 22:42, 1F

06/13 22:43, , 2F
S21peak <=>Zin最接近conju. match的點
06/13 22:43, 2F

06/13 22:48, , 3F
若設計中心頻率時是conju m.則上述發生在
06/13 22:48, 3F

06/13 22:48, , 4F
同一頻率
06/13 22:48, 4F

06/13 22:48, , 5F
但LNA輸入端在中心頻率是設計在noise匹配
06/13 22:48, 5F

06/13 23:06, , 6F
因為工程師不夠強!沒tune好
06/13 23:06, 6F

06/14 21:35, , 7F
謝謝
06/14 21:35, 7F
文章代碼(AID): #1FrsXk8j (comm_and_RF)
討論串 (同標題文章)
文章代碼(AID): #1FrsXk8j (comm_and_RF)