[問題] GRUB的紫色背景開機選單會停滯數秒
我的 Ubuntnu + Win10 雙系統，會有深紫色背景的GRU開機選單。
正常來說應該是一出現畫面就能馬上操作？因為我在另一台上面安裝就是這樣。
不過我這台很奇怪，會先停滯大約3秒，不會倒數、對任何操作沒反應，
剛開始裝好就是這樣，沒有造成什麼問題，但是就讓我每次開機等得很不爽~
而且正常的另一台是HDD，會停滯的這一台是SSD，所以應該不是讀取所需時間的問題，
請問可能是哪裡出錯呢？
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 118.233.216.167
※ 文章網址: https://www.ptt.cc/bbs/Linux/M.1474795507.A.7CB.html
推
09/25 18:14, , 1F
09/25 18:14, 1F
看了，但是看不出哪個選項可以改善
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
※ 編輯: deo2000 (118.233.216.167), 09/25/2016 18:23:01
推
09/26 07:37, , 2F
09/26 07:37, 2F
推
09/27 21:27, , 3F
09/27 21:27, 3F
→
09/27 21:27, , 4F
09/27 21:27, 4F
→
09/27 21:29, , 5F
09/27 21:29, 5F