Re: [問題] failed dependency (riak)
感謝Adama在推文中的回答,
我用了sudo yum localinstall riak-1.0.1-1.el5.i386.rpm的確可以多run一點了,
但是還是會出錯, 無法完成, 我的錯誤訊息如下:
[root@localhost Downloads]# ls riak-1.0.2-1.el5.i386.rpm
[root@localhost Downloads]# yum localinstall riak-1.0.2-1.el5.i386.rpm
Loaded plugins: langpacks, presto, refresh-packagekit Setting up
Local Package Process Examining riak-1.0.2-1.el5.i386.rpm: riak-1.0.2-1.i386
Marking riak-1.0.2-1.el5.i386.rpm to be installed
fedora/metalink | 8.8 kB 00:00
fedora | 4.2 kB 00:00
fedora/primary_db | 11 MB 00:24
fedora/group | 1.8 MB 00:05
updates/metalink | 5.5 kB 00:00
updates | 4.7 kB
00:00 ...
updates/primary_db | 4.4 MB 00:07
updates/group | 1.9 MB 00:04
Resolving Dependencies
--> Running transaction check
---> Package riak.i386 0:1.0.2-1 will be installed
--> Processing Dependency: libcrypto.so.6 for package: riak-1.0.2-1.i386
--> Processing Dependency: libssl.so.6 for package: riak-1.0.2-1.i386
--> Finished Dependency Resolution
Error: Package: riak-1.0.2-1.i386 (/riak-1.0.2-1.el5.i386)
Requires: libcrypto.so.6
Error: Package: riak-1.0.2-1.i386 (/riak-1.0.2-1.el5.i386)
Requires: libssl.so.6
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
好像還是需要libcrypto.so.6跟libssl.so.6??
可以請大家幫我看看這個問題嗎?
另外, 想請問為什麼rpm -Uvh不行的, 換了yum localinstall就可以?
這後面的道理是什麼呢?
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 61.228.88.109
※ 編輯: klain 來自: 61.228.88.109 (11/22 01:38)
討論串 (同標題文章)
以下文章回應了本文：
完整討論串 (本文為第 2 之 3 篇)：