Re: Ubuntu 8.10 如何安裝grub-gfxboot?
Hi superliang:
After I installed grub-gfxboot-0.9.7-36.i386.deb
I copied my message.suse file to /boot/grub
and added "gfxmenu /boot/grub/message" line in the beginning of
/boot/grub/menu.lst file.
Then, I type "sudo grub" to enter grub.
In grub, I typed "find /boot/grub/stage1" to find my ubuntu
installed partition.
It shows (hd0,1) and (hd0,4)
If I setup root(hd0,1) it will boot up by my fedora menu,
thus, I typed "root (hd0,4)" and "setup (hd0)" and quit grub.
After doing things above. I reboot my computer then saw that
gfx-menu did not show up.
thank you for answer me, and here is my hardware infomation
==============================================================
eric@eric-laptop:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Genuine Intel(R) CPU 575 @ 2.00GHz
stepping : 13
cpu MHz : 1994.998
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc up
arch_perfmon pebs bts pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3989.99
clflush size : 64
RaLink Device 0781
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet
controller (rev 02)
eric@eric-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
eric@eric-laptop:~$ sudo hdparm -i /dev/sda
/dev/sda:
Model=ST9160827AS , FwRev=3.AAA , SerialNo=
5RF00DEQ
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=312581808
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-4,5,6,7
* signifies the current active mode
※ 引述《superliang (我不是霹靂貓)》之銘言：
: ※ 引述《who4 (eric)》之銘言：
: : 這兩天為了裝這個東西花了我好多時間
: : 翻遍所有網站還是找不到可以解決的方法....
: : 當初是在這個網頁看到開機選單也可以美化
: : http://odinq.blogspot.com/2008/02/ubuntu-suse-grub.html
: : 因此照著網頁上的方法
: : 下載了grub-gfxboot-0.9.7-5.i386.deb跟message.suse的檔案
: : 移除grub後
: : 再安裝這個grub-gfxboot
: : 後來在grub裡面執行find /boot/grub/stage1
: : 卻發現找不到stage1這個檔案 (我確定我有這個檔案)
: : 因為這個緣故導致我無法開機只好重灌
: : 後來重灌換了grub-gfxboot-0.9.7-36.i386.deb這個檔案
: : 這次可以找到我的開機磁區是在 (hd0,4)
: : 接著打了以下指令:
: Where you type this command?in shell or in grub command?
: : root (hd0,4)
: : setup (hd0)
: : quit
: : sudo reboot
: Can you post your hardware information?(like your hard disk,cpu,network)
: I also don't know the command that you type.
: Some are grub command and some are shell command?
--
雖然離別以後
就無法在相見
可是我一點也不感到寂寞
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 122.116.94.14
討論串 (同標題文章)
本文引述了以下文章的的內容：
完整討論串 (本文為第 3 之 4 篇)：