[問題] 投稿時上傳系統compile後的圖檔未出現
我最近在投springer下面的期刊,要用editorial manager上傳
他們希望圖檔是用eps或是tiff
(其實他們也接受任何形式的電子檔包括word,只是鼓勵用latex)
我是用acrobat把jpg轉成eps的
我現在遇到的問題是在我的電腦裡面可以匯出pdf
但是把tex和eps圖檔上傳到em系統的時候
compile出來的結果是只有字和表格但沒有圖
圖的地方是空白的
我查了一下HELP
https://www.editorialmanager.com/robohelp/11.2/index.htm
裡面有提到 What if my figures are not appearing?
It may be possible that your images are referenced in subfolders. Images
cannot be referenced in sub folders, otherwise they will not appear in the
PDF.
An example of a correctly referenced image is:
\epsfig{figure=alld.eps,width=.5\textwidth}.
An example of an incorrectly referenced image is:
\epsfig{figure=images/alld.eps,width=.5\textwidth}
所以我依照他們的建議把讀圖指令改成
\begin{figure}[ht] % 進入Floats環境
\centering
\epsfig{file=fig1.eps,width=.5\textwidth}
%\includegraphics[scale=0.5]{fig1.eps}
\caption{blahblah}
\end{figure}
%是原本使用的指令
也在一開始加了\usepackage{epsfig}
在自己的電腦用xelatex匯出pdf都沒問題
但是重新上傳以後compile出來還是沒有圖...就沒法submit
我有在想說是不是圖太多加附錄30幾張,超乎他們容量?全部總共17MB左右
我有寫信給editor,她把我的信轉給一個助理
然後助理請我給他原始檔,他會幫我上傳
不過我給他好幾天以後現在還沒收到回應
所以想說上來問一下各位高手有沒有什麼解決的辦法
或是有投springer底下期刊有相關經驗可以分享的,謝謝!
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 140.112.190.123
※ 文章網址: https://www.ptt.cc/bbs/LaTeX/M.1433485669.A.5C1.html
※ 編輯: sharkga (140.112.190.123), 06/05/2015 14:29:44
推
06/05 16:59, , 1F
06/05 16:59, 1F
→
06/05 18:01, , 2F
06/05 18:01, 2F
→
06/05 18:03, , 3F
06/05 18:03, 3F
→
06/05 20:16, , 4F
06/05 20:16, 4F
→
06/06 01:12, , 5F
06/06 01:12, 5F
推
06/06 05:22, , 6F
06/06 05:22, 6F
dvi→ps出現的是
Process started
filename.dvi
: No such file or directory
This is dvips(k) 5.993 Copyright 2013 Radical Eye Software
(www.radicaleye.com) dvips: DVI file can't be opened:
Process exited with error(s)
這是說我要去下載軟體嗎? 還是要從設定texmaker裡面更改什麼?
不好意思我對latex架構還是很不熟
※ 編輯: sharkga (36.229.125.138), 06/06/2015 11:27:15
推
06/06 18:00, , 7F
06/06 18:00, 7F
→
06/06 18:02, , 8F
06/06 18:02, 8F
推
06/06 18:12, , 9F
06/06 18:12, 9F
→
06/06 18:13, , 10F
06/06 18:13, 10F
→
06/06 18:14, , 11F
06/06 18:14, 11F
→
06/06 18:49, , 12F
06/06 18:49, 12F
我發現dvi檔案出不來的原因了,當時我參考這篇文章安裝texmaker
http://goo.gl/0bjhrH
所以在latex的欄位中加了xe,變成xelatex -interaction=nonstopmode %.tex
剛剛把xe拿掉就可以跑出dvi檔案了,也可以從dvi→ps→pdf
但是上傳tex檔以後圖片還是沒出現...還是不知道為什麼
我後來改上傳dvi檔案有出現圖片,但是引用的地方都變成問號了
回去看HELP,發現有解法
What if I see “?” Question marks in my PDF instead of my bibliographic
references?
Mostly at the End of your LaTeX-File you will include a link to your
bibliographic references. We suggest using one of the 2 following methods to
include your references to you LaTeX-Submission (using an external
bibliographic file):
Method A:
\bibliographystyle{spmpsci}
\bibliography{reference}
Bibliographic file is a *.bib file, here: reference.bib
Method B:
\bibliographystyle{plain}
\input{Blockseminar_opt_trans.bbl}
Bibliographic file is a *.bbl file, here: Blockseminar_opt_trans.bbl
採用方法A以後終於看到正確的PDF檔案了!
另外他們應該也支援xelatex,只是不知道為什麼上傳tex圖檔都出不來啊
而且之前用xelatex應該也可以才對吧...
Which TeXVersion is supported?
In our PDF Builder we include a determination based on what is in the TeX
file. The options are:
- LATEX
- PDFLATEX
- TEX
- XELATEX
- MIKTEX
For example it will attempt to build using LATEX first, if error, then it
will try PDFLATEX that is what the EM Submission PDF log will displays if
there is an error.
總之感謝各位高手的幫助,所以我也寫得盡量詳細
※ 編輯: sharkga (36.229.125.138), 06/06/2015 20:53:28
推
06/07 13:35, , 13F
06/07 13:35, 13F
→
06/09 09:13, , 14F
06/09 09:13, 14F
討論串 (同標題文章)
完整討論串 (本文為第 1 之 2 篇):