Re: 9.1 RELENG_9 Unable to cleanly dismount root partition on

看板FB_stable作者時間13年前 (2012/08/28 04:32), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串14/19 (看更多)
On Mon, 27 Aug 2012, Kevin Oberman wrote: >> No obvious problems jumped out at me. Here are my notes: >> http://www.wonkity.com/~wblock/docs/html/disksetup.html >> >> The gpart version is halfway down. I really need to switch that around. > > Pretty good page, but I would really suggest that you also do either > 4k or 1M alignment on your partitions. If you don't and use a disk > with 4K blocks (internally), you will have terrible performance. You mean add the -a parameter for gpart? All that -a does is round partition starting blocks and sizes to even values. If the numbers given are already even multiples, it does nothing. The reason -a4k is not shown there is because until a few months ago, -a overrode -b. So # gpart add -t freebsd-ufs -l gprootfs -a4k -b 1M -s 2G da0 did not start that partition at 1M, but instead at the next even 4K block after the first 512K partition; block 1064 instead of block 2048, AFAIR. The fix to gpart (thanks to ae@) is in 9-stable and 9.1, but not earlier releases. Mentioned a little farther down in the article is that keeping additional partitions to even multiples of 1M or 1G size will keep them in alignment. > 1M is recommended by Microsoft and used by Windows, but seems a bit > excessive to me. Also by some Sun RAID controllers and other systems. 1M is a nice even multiple of a lot of common block sizes. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
文章代碼(AID): #1GEzb3VD (FB_stable)
討論串 (同標題文章)
完整討論串 (本文為第 14 之 19 篇):
文章代碼(AID): #1GEzb3VD (FB_stable)