Re: 8.2-RC1: installer does not recognize some disks properly

On Tue, Dec 28, 2010 at 8:49 PM, Claus Assmann
<freebsd+stable@esmtp.org<freebsd%2Bstable@esmtp.org>
> wrote:

> I just tried to install 8.2-RC1 (amd64) on one of my machines.  It
> has two disks: WDC WD1001FALS-4 and SAMSUNG HD103SJ, both 1TB SATA
> disks. The installer shows them as ad10 and ad8. Both disks are
> already in use and have been "formatted" via fdisk, e.g., the Samsung
> (ad10) has 3 partitions (BF, A9, A8)) and the WDC has 4 (A6, BF,
> A5, A9).  However, the installer only shows the existing partitions
> for the Samsung, but not for the WDC. The WDC is the boot disk and
> has a Grub loader installed. What could be the reason that the
> existing partitioning is not recognized by the installer?
>

I've got a similar issue via the thread about a 2y/o laptop and a new hard
drive. Linux sees the drive fine and can use it but freebsd cannot for some
reason.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"