Re: mouse problems....

On Wed, 13 Oct 2010, Polytropon wrote:

> Correct. If you disable HAL, and your X is configured to run *WITH*
> HAL, it won't run anymore. Edit /etc/X11/xorg.conf (and if not
> present, create it) to make X work *WITHOUT* HAL.
>
> How it is to be done is described here:
>
> http://www.wonkity.com/~wblock/docs/html/aei.html

I've followed only parts of this thread, and there are multiple 
problems.  First is installing X on a server.  Second is a KVM switch, 
many of which are problematic.  Next is that the KVM converts USB to 
PS/2, which... well, maybe it's fine.  Finally, a "jumpy mouse" problem 
with moused on console screams that it's the KVM, not moused or USB or 
xorg config.

My suggestion would be to *not* install X on a server.  If it's really 
required, use an actual keyboard and monitor on that server for those 
times when ssh -X/-Y aren't enough, and avoid the KVM.

> If you use a USB mouse, set moused_enable="NO", as the USB subsystem
> will call moused with the correct settings automatically.

USB mice cause moused to be run anyway, but there are differences.  If 
you want switching between X and console to be fast, enable moused.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"