Re: ipfw check-state issue

Adi Tirla <tirlaadi@gmail.com> writes:

> heya
> 
> i've been using freebsd's ipfw for quite a while and recently on a new
> server i've got this issue with ipfw that i can't understand ... something
> is wrong ...
> 
> 01000 8042 1947866 allow ip from any to any via fxp0
> 01010 0 0 allow ip from any to any via lo0
> 01014 9886 4170269 divert 8668 ip from any to any in via vr0
> 01015 0 0 check-state
> 01130 14679 5695969 skipto 1800 ip from any to any out via vr0 keep-state
> 01300 0 0 deny ip from 192.168.0.0/16 <http://192.168.0.0/16> to any in via
> vr0
> 01301 0 0 deny ip from 172.16.0.0/12 <http://172.16.0.0/12> to any in via
> vr0
> 01302 4 140 deny ip from 10.0.0.0/8 <http://10.0.0.0/8> to any in via vr0
> 01303 0 0 deny ip from 127.0.0.0/8 <http://127.0.0.0/8> to any in via vr0
> 01304 0 0 deny ip from 0.0.0.0/8 <http://0.0.0.0/8> to any in via vr0
> 01305 0 0 deny ip from 169.254.0.0/16 <http://169.254.0.0/16> to any in via
> vr0
> 01306 0 0 deny ip from 192.0.2.0/24 <http://192.0.2.0/24> to any in via vr0
> 01307 0 0 deny ip from 204.152.64.0/23 <http://204.152.64.0/23> to any in
> via vr0
> 01308 0 0 deny ip from 224.0.0.0/3 <http://224.0.0.0/3> to any in via vr0
> 01320 0 0 deny tcp from any to any dst-port 137 in via vr0
> 01321 0 0 deny tcp from any to any dst-port 138 in via vr0
> 01322 4 192 deny tcp from any to any dst-port 139 in via vr0
> 01323 3 144 deny tcp from any to any dst-port 81 in via vr0
> 01330 0 0 deny ip from any to any frag in via vr0
> 01350 362 71038 deny tcp from any to any established in via vr0
> 01400 2879 346276 deny log logamount 10 ip from any to any in via vr0
> 01450 0 0 deny log logamount 10 ip from any to any out via vr0
> 01800 8049 1944267 divert 8668 ip from any to any out via vr0
> 01801 14676 5695755 allow ip from any to any
> 01999 0 0 deny log logamount 10 ip from any to any
> 65535 758 727615 deny ip from any to any
> 
> 
> please enlighten me why the "almost" standard firewall from the handbook ...
> ain't working properly .... !? look ... the check-state ain't matching any
> packets ... and mostly ... packets skip the rule 1999 ... why?! i've seen
> the "kernel: oups" too many times .... don't tell me i've got a third
> network card cause it ain't so!
> 
> another thing ... if i insert pipes for traffic shaping ... the outgoing
> packets are inserted into the input pipes ... but not into the outgoing
> pipes .... why ?
> 
> i am missing somethin' .... what ?
> 
> 
> kernel compiled with these additional options ....
> options IPFIREWALL
> options IPFIREWALL_VERBOSE
> options IPFIREWALL_VERBOSE_LIMIT=10
> options IPFIREWALL_FORWARD
> options DUMMYNET
> options HZ=1000
> options IPDIVERT
> enlightment please ....

Any firewall where a packet may get passed to the same divert pipe
multiple times isn't *close* to "almost standard."  Try actually using
the standard one, as your modifications don't make a lot of sense.
Nor do I understand those URLs in the RFC1918 rules...
_______________________________________________
freebsd-security@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-security
To unsubscribe, send any mail to "freebsd-security-unsubscribe@freebsd.org"