Re: consistent VM hang during reboot

On May 8, 2014, at 11:03 AM, John Baldwin <jhb@freebsd.org> wrote:

> On Wednesday, May 07, 2014 7:15:43 pm John Nielsen wrote:
>> I am trying to solve a problem with amd64 FreeBSD virtual machines running on a Linux+KVM hypervisor. To be honest I'm not sure if the problem is in FreeBSD or 
> the hypervisor, but I'm trying to rule out the OS first.
>> 
>> The _second_ time FreeBSD boots in a virtual machine with more than one core, the boot hangs just before the kernel would normally print e.g. "SMP: AP CPU #1 
> Launched!" (The last line on the console is "usbus0: 12Mbps Full Speed USB v1.0", but the problem persists even without USB). The VM will boot fine a first time, 
> but running either "shutdown -r now" OR "reboot" will lead to a hung second boot. Stopping and starting the host qemu-kvm process is the only way to continue.
>> 
>> The problem seems to be triggered by something in the SMP portion of cpu_reset() (from sys/amd64/amd64/vm_machdep.c). If I hit the virtual "reset" button the next 
> boot is fine. If I have 'kern.smp.disabled="1"' set for the initial boot then subsequent boots are fine (but I can only use one CPU core, of course). However, if I 
> boot normally the first time then set 'kern.smp.disabled="1"' for the second (re)boot, the problem is triggered. Apparently something in the shutdown code is 
> "poisoning the well" for the next boot.
>> 
>> The problem is present in FreeBSD 8.4, 9.2, 10.0 and 11-CURRENT as of yesterday.
>> 
>> This (heavy-handed and wrong) patch (to HEAD) lets me avoid the issue:
>> 
>> --- sys/amd64/amd64/vm_machdep.c.orig	2014-05-07 13:19:07.400981580 -0600
>> +++ sys/amd64/amd64/vm_machdep.c	2014-05-07 17:02:52.416783795 -0600
>> @@ -593,7 +593,7 @@
>> void
>> cpu_reset()
>> {
>> -#ifdef SMP
>> +#if 0
>> 	cpuset_t map;
>> 	u_int cnt;
>> 
>> I've tried skipping or disabling smaller chunks of code within the #if block but haven't found a consistent winner yet.
>> 
>> I'm hoping the list will have suggestions on how I can further narrow down the problem, or theories on what might be going on.
> 
> Can you try forcing the reboot to occur on the BSP (via 'cpuset -l 0 reboot')
> or a non-BSP ('cpuset -l 1 reboot') to see if that has any effect?  It might
> not, but if it does it would help narrow down the code to consider.

Hello jhb, thanks for responding.

I tried your suggestion but unfortunately it does not make any difference. The reboot hangs regardless of which CPU I assign the command to.

Any other suggestions?

JN

_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"