Re: [CFT] Ralink RT2860, RT2870, RT3060, RT3090 support
Hi, Bernhard!
My Acorp WPCI-150N (RT3060 Wireless 802.11n) not working.
==================================================================
# ifconfig
ral0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:e0:60:47:5b:9d
inet6 fe80::2e0:60ff:fe47:5b9d%ral0 prefixlen 64 scopeid 0x2
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:e0:60:47:5b:9d
inet6 fe80::2e0:60ff:fe47:5b9d%wlan0 prefixlen 64 tentative scopeid 0x5
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
ssid ASDFGHJ channel 11 (2462 MHz 11g) bssid 00:e0:60:47:5b:9d
country US authmode OPEN privacy OFF txpower 0 scanvalid 60
protmode CTS wme dtimperiod 1 -dfs
==================================================================
# ifconfig wlan0 txpower 10
ifconfig: SIOCS80211: Operation not supported
==================================================================
I scanned RF by mobile devices, but nothing came.
I made the files from rt2860.c, rt2860reg.h rt2860var.h and put to
/usr/src/sys/dev/ral
/usr/src/sys/modules/ralfw/rt3060/
/usr/src/sys/modules/ral
then compiled kernel module, but nothing...
The computer does not see other AP's.
討論串 (同標題文章)
完整討論串 (本文為第 18 之 19 篇)：