Re: serial console not accepting input?

On Thu, Jan 24, 2013 at 01:23:50PM +0000, Eggert, Lars wrote:
| Hi,
| 
| On Jan 23, 2013, at 17:04, Dimitry Andric <dim@freebsd.org> wrote:
| > CTS/RTS hardware flow control, maybe?  E.g. add ":hw" to the default
| > settings in /etc/gettytab, or make a specific entry with an added ":hw"
| > setting.
| 
| nope, I don't even get a login prompt if I do that.
| 
| > If it is a physical serial console, you could also simply have a bad
| > cable.  Try swapping it with working system. :)
| 
| Spent the last few hours fiddling with the cabling and the various BIOS 
| serial redirection options (it's a Dell 2950). My best guess is that 
| the serial port on the box is physically broken.

Try to do a {Ctrl}D to see if works.  We've seen that the TX on reset
hangs but input works fine.  I'm not sure if we ran into this with
uart(4) but had a problem with sio(4).

Doug A.
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"