Re: USB not working

On Mon, 25 Feb 2013, Hans Petter Selasky wrote:

> On Monday 25 February 2013 15:01:24 Daniel Eischen wrote:
>> On Mon, 25 Feb 2013, Hans Petter Selasky wrote:
>>> On Sunday 24 February 2013 20:31:52 Daniel Eischen wrote:
>>>> Hey, I've got a Dell Inspiron 15R Special Edition and haven't
>>>> had working USB since first installing FreeBSD on it.  I'm
>>>> currently at r247154.
>>>>
>>>> When I insert a flash drive (which works fine on my desktop
>>>> -current system), it is not recognized.  I've tried multiple
>>>> different USB drives (external HDD, flash) that all work
>>>> on my desktop, but aren't recognized on me Dell notebook.
>>>> This is what is in dmesg:
>>>>
>>>> xhci_do_command: Command timeout!
>>>> usb_alloc_device: device init 2 failed (USB_ERR_TIMEOUT, ignored)
>>>> ugen0.2: <Unknown> at usbus0 (disconnected)
>>>> uhub_reattach_port: could not allocate new device
>>>>
>>>> I've got the output of a dmesg, pciconf -lv, and messages
>>>>
>>>> during insertion with:
>>>>    hw.usb.dev.debug=1
>>>>    hw.usb.umass.debug=1
>>>>    hw.usb.uhub.debug=1
>>>>    hw.usb.ugen.debug=1
>>>>    hw.usb.xhci.debug=1
>>>>
>>>> here:
>>>>    http://people.freebsd.org/~deischen/usb/dmesg.txt
>>>>    http://people.freebsd.org/~deischen/usb/pciconf.txt
>>>>    http://people.freebsd.org/~deischen/usb/usb_flash_insertion.tx
>>>>
>>>> Any suggestions?
>>>
>>> Try to set:
>>>
>>> sysctl hw.usb.xhci.xhci_port_route=-1
>>>
>>> In /boot/loader.conf
>>>
>>> I see you have a Pantherpoint chipset, and those have special port
>>> routing features.
>>
>> Thanks, that didn't help.
>>
>>    $ sysctl hw.usb.xhci.xhci_port_route
>>    hw.usb.xhci.xhci_port_route: 1
>>
>
> It should be minus one.

Oops, that blended right in with the '='.  I just tried -1 and it
didn't work:

   $ sysctl hw.usb.xhci.xhci_port_route
   hw.usb.xhci.xhci_port_route: -1

Feb 25 09:28:25 rigel kernel: xhci_do_command: Command timeout!
Feb 25 09:28:25 rigel kernel: usb_alloc_device: device init 2 failed (USB_ERR_TIMEOUT, ignored)
Feb 25 09:28:25 rigel kernel: ugen0.2: <Unknown> at usbus0 (disconnected)
Feb 25 09:28:25 rigel kernel: uhub_reattach_port: could not allocate new device

Should I reboot just to start fresh?

-- 
DE
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"