Re: LSI supported mps(4) driver available

> Out of those six Drive, one drive is detected as "1.5Gbps" (see below par=
t in dmesg log)
>
> =C2=A0 =C2=A0 =C2=A0 =C2=A0PHY[8].AttachedDevHandle: 0x0009
> =C2=A0 =C2=A0 =C2=A0 =C2=A0PHY[8].LinkRate: 1.5Gbps (0x80)
> =C2=A0 =C2=A0 =C2=A0 =C2=A0PHY[8].PhyStatus: NewTargetAdde
>
> LSI IR does not support mix of mix of different link speed Drivers in a s=
ingle Volume.
> I am not sure if this is root cause of the issue, but definetly worth to =
try why that Particular drive is
> At 1.5 Gbps link ?
>
> Can you try to see if it is cable which is causing link to 1.5 OR Drive i=
tself has 1.5 Gbps max speed. ?
>

All six of them are SEAGATE ST9300603SS FS62, 1.5Gbps speed is quite odd.

Can't check cabeling right now, I'll exclude that drive from tests for now
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"