Re: sparc64 r228561 panic: kmem_suballoc: bad status return of 3

看板FB_current作者時間14年前 (2011/12/16 18:32), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串3/6 (看更多)
On Fri, Dec 16, 2011 at 10:24:44AM +0100, Monthadar Al Jaberi wrote: > Hi, > > do you get your panic at early in the boot stage? yes, the panic is straight after WARNING: WITNESS option enabled, expect reduced performance. > I get the same message on arm when I set the DEBUG_MEMGUARD flag early > on bootup: I don't have this in kernel config. > Nov 24 201018:40:27 > poweron_pll > EMI_CTRL 0x1C084040 > FRAC 0x92926192 > init_clock > init_ddr_mt46v32m16_133Mhz > exit self refresh timeout > power 0x00310710 > Frac 0x92926192 > start change cpu freq > hbus 0x00000003 > cpu 0x00010001 > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2011 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > \0x09The Rege > nts of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-CURRENT #948: Thu Dec 15 16:45:14 UTC 2011 > root@bsd.ab:/usr/obj/arm.arm/usr/src/sys/ARM arm > WARNING: WITNESS option enabled, expect reduced performance. > WARNING: DIAGNOSTIC option enabled, expect reduced performance. > MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: > \0x09MEMGUARD map base: 0xc0e8b000 > \0x09MEMGUARD map lim > it: 0xc790b000 > \0x09MEMGUARD map size: 109056 KBytes > CPU: ARM926EJ-S rev 5 (ARM9EJ-S core) > DC enabled IC enabled WB enabled LABT > 16KB/32B 4-way Instruction cache > 16KB/32B 4-way write-back-locking-C Data cache > real memory = 67108864 (64 MB) > panic: kmem_suballoc: bad status return of 3 > KDB: enter: panic > > br, > > On Fri, Dec 16, 2011 at 9:40 AM, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > > Updating from r216048 to r228561 on sparc64, > > with sys/conf/newvers.sh changed to REVISION="9.9". > > > > Trinscribed by hand: > > > > FreeBSD 9.9-CURRENT #3 r228561M: > > > > panic: kmem_suballoc: bad status return of 3 > > KDB: enter: panic > > [ thread pid 0 tid 0 ] > > The keyboard froze, couldn't get a bt, > > required a cold reboot. > > > > My /etc/make.conf and kernel config files are below. > > > > Any advice? > > > > Many thanks > > Anton > > > > > > > > > > % cat /etc/make.conf > > # Add SMTP AUTH support to Sendmail > > SENDMAIL_CFLAGS+= ꀠ-I/usr/local/include -DSASL=2 > > # added by use.perl 2011-11-15 09:47:38 > > PERL_VERSION=5.14.1 > > > > % cat /root/kernels/QOF > > > > makeoptions ꀠꀠDEBUG=-g > > makeoptions ꀠꀠMODULES_OVERRIDE="geom/geom_part geom/geom_label opensolaris zfs" > > > > options ꀠꀠꀠꀠALT_BREAK_TO_DEBUGGER > > options ꀠꀠꀠꀠBREAK_TO_DEBUGGER > > options ꀠꀠꀠꀠCD9660 > > options ꀠꀠꀠꀠDDB > > #options ꀠꀠꀠ啲XCEPTION_TRACING > > options ꀠꀠꀠꀠFFS > > options ꀠꀠꀠꀠGDB > > options ꀠꀠꀠꀠINET > > options ꀠꀠꀠꀠINET6 > > options ꀠꀠꀠꀠINVARIANTS > > options ꀠꀠꀠꀠINVARIANT_SUPPORT > > #options ꀠꀠꀠ啱PI_PREEMPTION > > options ꀠꀠꀠꀠKDB > > options ꀠꀠꀠꀠKTRACE > > options ꀠꀠꀠꀠMD_ROOT > > options ꀠꀠꀠꀠMSDOSFS > > options ꀠꀠꀠꀠNFSCLIENT > > options ꀠꀠꀠꀠNFSLOCKD > > options ꀠꀠꀠꀠP1003_1B_SEMAPHORES > > #options ꀠꀠꀠ嘭REEMPTION > > options ꀠꀠꀠꀠPRINTF_BUFR_SIZE=128 > > options ꀠꀠꀠꀠPROCFS > > options ꀠꀠꀠꀠPSEUDOFS > > options ꀠꀠꀠꀠSCHED_4BSD > > #options ꀠꀠꀠ嚒CHED_ULE > > options ꀠꀠꀠꀠSCSI_DELAY=3000 > > options ꀠꀠꀠꀠSCTP ꀠꀠꀠꀠꀠꀠꀠꀠꀠꀣ Stream Control Transmission Protocol > > options ꀠꀠꀠꀠSOFTUPDATES > > options ꀠꀠꀠꀠSYSVMSG > > options ꀠꀠꀠꀠSYSVSEM > > options ꀠꀠꀠꀠSYSVSHM > > options ꀠꀠꀠꀠUFS_DIRHASH > > #options ꀠꀠꀠ吚WX_TRACE_ENABLE > > options ꀠꀠꀠꀠWITNESS > > #options ꀠꀠꀠ咗ITNESS_KDB > > options ꀠꀠꀠꀠWITNESS_SKIPSPIN > > options ꀠꀠꀠꀠ_KPOSIX_PRIORITY_SCHEDULING > > > > options ꀠꀠꀠꀠCOMPAT_43TTY ꀠꀠꀠꀠꀠꀣ BSD 4.3 TTY compat (sgtty) > > options ꀠꀠꀠꀠSTACK ꀠꀠꀠꀠꀠꀠꀠꀠꀠ# stack(9) support > > options ꀠꀠꀠꀠHWPMC_HOOKS ꀠꀠꀠꀠꀠꀠ# Necessary kernel hooks for hwpmc(4) > > options ꀠꀠꀠꀠKBD_INSTALL_CDEV # install a CDEV entry in /dev > > > > device ꀠꀠꀠꀠ乸ta > > device ꀠꀠꀠꀠ乸tadisk > > device ꀠꀠꀠꀠ乸tapicd > > device ꀠꀠꀠꀠ乸tapicam > > device ꀠꀠꀠꀠ乸uxio > > device ꀠꀠꀠꀠ毪ge > > device ꀠꀠꀠꀠ毪pf > > device ꀠꀠꀠꀠ氲d > > device ꀠꀠꀠꀠ氽a > > device ꀠꀠꀠꀠ汢bus > > device ꀠꀠꀠꀠ汢eprom ꀠꀠꀠꀠꀣ eeprom (really a front-end for the MK48Txx) > > device ꀠꀠꀠꀠ汢hci > > device ꀠꀠꀠꀠ汢ther ꀠꀠꀠꀠꀠ# Ethernet support > > device ꀠꀠꀠꀠ沲irmware ꀠꀠꀠꀣ firmware assist module > > device ꀠꀠꀠꀠ湶sa > > device ꀠꀠꀠꀠ溻oop ꀠꀠꀠꀠꀠꀣ Network loopback > > device ꀠꀠꀠꀠ溻pt > > device ꀠꀠꀠꀠ滟achfb ꀠꀠꀠꀠꀣ ATI Mach64 framebuffers > > device ꀠꀠꀠꀠ滟c146818 ꀠꀠꀠꀣ Motorola MC146818 and compatible clocks > > device ꀠꀠꀠꀠ滟d > > device ꀠꀠꀠꀠ滟iibus ꀠꀠꀠꀠꀣ MII bus support > > device ꀠꀠꀠꀠ滟k48txx ꀠꀠꀠꀠ# Mostek MK48Txx clocks > > device ꀠꀠꀠꀠ漑hci > > device ꀠꀠꀠꀠ漤ass > > device ꀠꀠꀠꀠ漤ci > > device ꀠꀠꀠꀠ漤ty ꀠꀠꀠꀠꀠꀠ# BSD-style compatibility pseudo ttys > > device ꀠꀠꀠꀠ漤uc ꀠꀠꀠꀠꀠꀠ# Multi-channel uarts > > device ꀠꀠꀠꀠ漤pbus > > device ꀠꀠꀠꀠ漤pc > > device ꀠꀠꀠꀠ澑andom ꀠꀠꀠꀠꀣ Entropy device > > device ꀠꀠꀠꀠ澑tc ꀠꀠꀠꀠꀠꀠ# rtc (really a front-end for the MC146818) > > device ꀠꀠꀠꀠ澵bus > > device ꀠꀠꀠꀠ澵c > > device ꀠꀠꀠꀠ澵cbus ꀠꀠꀠꀠꀠ# SCSI bus (required for SCSI) > > device ꀠꀠꀠꀠ澵cc ꀠꀠꀠꀠꀠꀠ# Serial communications controllers. > > device ꀠꀠꀠꀠ澵nd_audiocs > > device ꀠꀠꀠꀠ澵nd_t4dwave > > device ꀠꀠꀠꀠ澵ound > > device ꀠꀠꀠꀠ濳un ꀠꀠꀠꀠꀠꀠ# Packet tunnel. > > device ꀠꀠꀠꀠ濵art ꀠꀠꀠꀠꀠꀣ Multi-uart driver > > device ꀠꀠꀠꀠ濵hci > > device ꀠꀠꀠꀠ濵kbd ꀠꀠꀠꀠꀠꀣ Keyboard > > device ꀠꀠꀠꀠ濵mass > > device ꀠꀠꀠꀠ濵ms ꀠꀠꀠꀠꀠꀠ# Mouse > > device ꀠꀠꀠꀠ濵sb > > > > -- > > Anton Shterenlikht > > Room 2.6, Queen's Building > > Mech Eng Dept > > Bristol University > > University Walk, Bristol BS8 1TR, UK > > Tel: +44 (0)117 331 5944 > > Fax: +44 (0)117 929 4423 > > _______________________________________________ > > freebsd-current@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > > > -- > Monthadar Al Jaberi > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
文章代碼(AID): #1EwnuYtE (FB_current)
討論串 (同標題文章)
文章代碼(AID): #1EwnuYtE (FB_current)