Re: Boot FreeBSD-current on macbook from USB stick ?

In message <4E7CF115.5000103@shadowsun.net>, Eric McCorkle writes:

>You can boot in legacy BIOS mode, which I do.  You have to create an
>MBR/BSD label installation, as if you have a GPT, the firmware will do
>what I described above.  Now, the mac firmware will wait 30 seconds
>before doing the legacy BIOS boot.  You can get around this by holding
>ALT at power on, and selecting "windows" (*sigh*).
>
>I have the following partition scheme:
>
>MBR---BSD---+---ZFS
>                       |
>                       +---Swap
>
>I do not use refit.

That does not seem to work for me, I have USB stick with a
NanoBSD on it, and it never gets recognized by the macbook,
so there is no 'windows' to select...

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"