Re: Thinkpad CD-ROM hotplug with ATA_CAM

看板FB_current作者時間14年前 (2011/09/17 13:32), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串6/6 (看更多)
On Fri, 16 Sep 2011, Kevin Oberman wrote: > > I fear that BIOS may have some issue. I have a T43 and found that, if > I booted with the DVD > installed, atacontrol (this was prior to ATA-CAM) would allow me to > detach, but if I then > inserted a hard drive and tried to attach it, the system would lock up. > > If I booted with a hard drive in the bay, I could detach, change > drives, and attach with no > problems. I don't recall if I could replace the hard drive with a DVD, > though and I don't have > physical access to that system ATM. Still, this sounds rather similar > to what I saw and it > was unique to the T43. I have had several other ThinkPads, all of > which allow me to swap > out the DVD for a different drive including the T520 I am using to > enter this reply. It's not entirely clear that this is relevant, but my T400 has very odd behavior with the CD drive either disappearing or taking a very long time to probe on warm boots. Linux (or grub? I don't remember.) also has some trouble finding the root device (hard disk) on warm boots, but FreeBSD does fine. -Ben Kaduk _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
文章代碼(AID): #1ET33Icq (FB_current)
文章代碼(AID): #1ET33Icq (FB_current)