Re: [問題] 關於微電腦介面控制的問題

看板Electronics作者 (我愛ASM)時間17年前 (2007/01/18 11:43), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串2/2 (看更多)
※ 引述《LOUSU (暱稱不過就是個暱稱)》之銘言: : Write the software that programs counter 2 to generate an 80KHz : square wave if the CLK input to counter 2 is 8 MHZ 8MHz的clock輸入,用counter做除頻產生80KHz的方波 : Program the 16550 for operation using six data bits,even parity : ,one stop bit,and a Baud rate of 19,200 using a 18.432 MHz clock. : (Assume that the I/O ports are numbered 20H and 22H) 用16650這個IC實作UART電路,鮑率是19200bps,6個data bits,偶位 元校驗,一個停止位元,16550的I/O位址是20H和22H. : Develop an ISA bus interface that is decoded at addresses 310H- : 313H.This tnterface must contain an 8255 accessed via these port : addresses.(Don't forget to buffer all inputs to the ISA bus card) 作一張ISA卡,他在PC中的i/o address在310H-313H,用來控制8255這個IC 作IO擴充,他還好心的提醒你ISA Card的輸入要作buffering. : Creat an ISA bus interface that allows four channels of anolog output : signals from 0 to 5.0V each.These four channels must be decoded at I/O : addresses 300H,310H,320H,and 330H.Also develop software that : supports the four channels. 作一張具備4通道DA輸出的ISA卡,輸出電壓是0-5V,每個通道輸出電 壓的值透過300H 310H 320H 330H的i/o address來控制。 : PCI bus,USB bus 微介面的I/O電路(ex.LCD A/D,D/A,8254,8255,6550)電路原理(程式) 上面的和PCI和USB無關....?好奇怪的書名.... : 不知道有沒有大大看得懂...拜託了... : 這裡是隱版嗎!? : 一位版有拜託我PO的 : 有他的MSN hishawtaco@yahoo.com.tw : 他很急...謝謝拉 : P.S 真的不是我自己 不要再解釋了... 現在有ISA的主機板很少,大概只有作IPC的廠商才有生產.PCI都快不見了... -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 140.132.23.74
文章代碼(AID): #15hkpCpB (Electronics)
文章代碼(AID): #15hkpCpB (Electronics)