Re: twa driver and 3ware 9650SE Raid adapter
On 7/22/2010 16:39, Damian Lubosch wrote:
> Hello!
>
> I am trying to install Dragonfly BSD 2.6.3 on a server with a 3ware 9650SE 2-port S-ATA2 RAID adapter but the installer does not recognize the RAID array.
>
> On the boot prompt I tried to "load twe" as well as "load twa" as well as both, but in all cases the installer is not able to detect a suitable harddrive device and aborts the installation..
>
> I have another, older Dragonfly 2.0 system running on an older version of the 3ware adapter 7000/8000 series with the twed driver, and because shinigsilence.com reported the 9500 series to work on Dragonfly BSD and because freebsd supports this adapter as well I hoped that it will work in 2.6.3 as well.
>
> Could somebody take a look why it does not work? If you need any kind of information, do not hesitate to ask! I will try to provide any kind of information that will help to make the controller work :-)
Damian,
the kernels used on the ISOs include twa(4) so no additional commands
should be necessary to enable it.
Can you please do a verbose boot (select in the loader menu) of the CD
and put up the /var/run/dmesg.boot somewhere? Also please put up the
output of 'pciconf -lv' on the machine.
Regards,
Sascha
討論串 (同標題文章)
完整討論串 (本文為第 2 之 7 篇)：