Re: Re: CRC FAILED: LAYER2

看板DFBSD_kernel作者時間16年前 (2009/07/08 09:01), 編輯推噓0(000)
留言0則, 0人參與, 最新討論串5/7 (看更多)
:Running this *online* couldn't find any 'B', so I guess I have to :boot it with a USB memory stick and try it again? : :.. :I'll also try memtest after that. Thanks for the hint. It's possible that HAMMER caught the problem before it wrote the sector back to disk, in which case it may only have gotten corrupted in-memory and the filesystem on-media might be ok. You can validate the entire filesystem offline (or if it is completely idle) with: hammer -f <device> show | egrep '^B' (that's carrot and B, not control-B) If no lines are marked bad in the show output then the filesystem is clean. This can take a while to run since it reads every single last bit of meta-data and data in the filesystem. If any hammer cleanup or reblocking op runs while the show is running the show command will blow up. The most likely scenario is that there's bad ram. -Matt Matthew Dillon <dillon@backplane.com>
文章代碼(AID): #1AK-_Hzs (DFBSD_kernel)
文章代碼(AID): #1AK-_Hzs (DFBSD_kernel)