Re: [PR] acpi module related bug in 1.2.0R
On Mon, Apr 11, 2005 at 09:17:02AM +0200, Joerg Sonnenberger wrote:
> On Sun, Apr 10, 2005 at 06:24:48PM +0800, Sepherosa Ziehau wrote:
> > 1) with set debug.acpi.disabled="cmbat children"
> > error messages continue to pop up.
> > 2) with set debug.acpi.avoid="_SB.PCI0.PCIE.CRD0 _SB.PCI0.PCIE.CRD1"
> > error messages shut up, everything works find.
>
> What about debug.acpi.disabled="bus"?
If it works with debug.acpi.disabled="bus" but not with
debug.acpi.disabled="children", that means it's AcpiGetType()
that's messing up something.
Probably `set debug.acpi.avoid' alone should also work, because
there's one piece of code that I overlooked; when debug.acpi.avoid
is set, it avoids running _INI and _STA methods, and namespaces list
above are never scanned according to files `dmesg.acpi1' and `dmesg.acpi2'
(which proves that my guess was wrong). Finding out which _INI or _STA
methods(there are 25 of them) is the problem is bit of a work, but if
you really don't mind the trouble of finding it out, you may want to start
with somewhere around here:
Device (CRD0)
{
Name (_ADR, 0x00010000)
Method (_INI, 0, NotSerialized)
{
SMI (0x95, 0x04)
}
Name (_S1D, 0x00)
Name (_S3D, 0x03)
}
change this to
Device (CRD0)
{
Name (_ADR, 0x00010000)
Method (_INI, 0, NotSerialized)
{
// SMI (0x95, 0x04)
}
Name (_S1D, 0x00)
Name (_S3D, 0x03)
}
then compile it with iasl command, save it as /boot/acpi_dsdt.aml, add
acpi_dsdt_load="YES"
in /boot/loader.conf and reboot.
討論串 (同標題文章)
完整討論串 (本文為第 7 之 10 篇)：