Re: ATA timeout
:Matt,
:
:I was looking at the ATA code to get more familiar with it, and I decided to
:check out the logs.
:
:Revisions 1.8 and 1.9 of ata-disk.c both seem to be vaguely related to my
:problem. Maybe. The first change adds MPIPE and does not back off into PIO
:mode if resources are lacking. I'm not sure about this one. But the second
:one changes the ATA reset timing. Could this have anything to do with my
:issue?
:
:jm
It seems unlikely to be related to the MPIPE code, but it could certainly
be related to the DELAY()'s. Most of the other changes, e.g. like the
ATA_S_READY flags checks, have kernel printf's associated with them so
if any of those were the cause there ought to be additional error or
warning lines printed to the console when the timeout occurs.
I looked back at the archives trying to find a post with the actual
kernel messages related to the timeout, or a better description of what
is happening, but couldn't find one. If you have that information it
would be helpful. i.e. (1) The exact error and/or warning lines that
are being printed on the console and (2) A description of the circumstances
where the timeout occurs (e.g. during boot, after boot, during heavy disk
I/O only, etc).
We've suspected that there is some sort of sequencing issue in the ATA
code for a while now but so far nobody has been able to put their finger
on it.
-Matt
Matthew Dillon
<dillon@backplane.com>
討論串 (同標題文章)