Re: uplcom(4) problem
Cedric Berger wrote:
>> ucom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr
> 2
>
>Version 3 is the new PL2303X chip I think, slightly incompatible.
>I'm having the same problem on OpenBSD, A new batch of usb to serial
>converter we bought stopped working :(
>Apparently there is a patch floating for FreeBSD, I've not tested it:
>http://gate.intercaf.ru/~lesha/6100/
Ah, definite progress, thanks. I tried that patch, and the modem now
responds OK to the initialisation command (AT+CRM=1). However, it
still times out on the dialling command (expecting CONNECT).
The linux 2.6.8 driver contains the same USB commands as this patch,
and a couple more; I tried inserting those too, and also changing the
CRTSCTS thing to 0x61 as in the linux driver, but no luck. But then
I didn't even have luck trying to get linux 2.4 to work. Perhaps
there are further weirdnesses with my device...
Will
討論串 (同標題文章)
完整討論串 (本文為第 25 之 25 篇)：