message at halt
Running DragonFly 1.1, on a scsi hd connected to a Adaptec 29160, I have
this output on halt command:
syncing disks... 5
done
Uptime: xxx
callout_reset(0xcf2769ac) from 0xc01a5acd: callout was not initialized
callout_stop(c0462d40,cf2769ac,c01a5acd,cf2769ac) at callout_stop+0x30
callout_stop(cf2769ac,cd8074a8,c191b638,11,228853af) at callout_stop+0x30
ahc_done(c191b638,cd8074a8) at ahc_done+0xc9
ahc_run_qoutfifo(c191b638) at ahc_run_qoutfifo+0xf1
ahc_poll(c16e4e38,c1664420,c16e5f68,cf276950,c16c3d40) at ahc_poll+0x178
xpt_polled_action(cf276950,c1664420,0,0,c0262513) at xpt_polled_action+0x92
dashutdown(0,8) at dashutdown+0x75
boot(8, cf276d40,c0404ef6,cf276c34,0) at boot+0x2c8
reboot(cf276c34,0,8,2,cf276d20) at reboot+0x26
syscall2(2f,2f,2f,2,8) at syscall2+0x246
Xint0x80_syscall() at Xint0x80_syscall+0x2a
Shutting down ACPI
The operating system has halted.
Please press ...
----
This output could have more lines when I boot the system without ACPI.
This seems to come from the scsi adapter?
Daniel Meynen
討論串 (同標題文章)
完整討論串 (本文為第 1 之 6 篇)：