Wireless AP troubles
I'm trying to set up a Wireless AP with DragonFly 1.1-CURRENT (cvsup'd
8/24).
The problem I am having is very strange: the machine contains 3 network
interfaces, 1 is hard wired and goes to the outside world, and is called
dc0. Another is a wired card that is hard wired and connects to the
local network and is called dc1, which has an IP of 10.0.0.1 netmask
255.255.255.0. The last network interface is the wireless card, which
is picked up by the wi driver, so it is wi0. It has the network IP of
10.0.0.3 netmask 255.255.255.255. Here is the output of ifconfig:
wi0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::201:3ff:fe79:82d9%wi0 prefixlen 64 scopeid 0x1
inet 10.0.0.3 netmask 0xffffffff broadcast 10.0.0.3
ether 00:01:03:79:82:d9
media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap>
status: associated
ssid awesome-wi 1:awesome-wi
stationname DF-AP
channel 6 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::2a0:ccff:fed2:a8d%dc0 prefixlen 64 scopeid 0x2
inet 130.85.220.246 netmask 0xfffffffc broadcast 130.85.220.247
ether 00:a0:cc:d2:0a:8d
media: Ethernet autoselect (10baseT/UTP)
status: active
dc1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::2a0:ccff:fed6:d2f9%dc1 prefixlen 64 scopeid 0x3
inet 10.0.0.2 netmask 0xffffffff broadcast 10.0.0.2
ether 00:a0:cc:d6:d2:f9
media: Ethernet autoselect (100baseTX)
status: active
DHCP is running, and both wired and wireless clients get an IP without
trouble. Wired clients are able to reach the outside world, the server,
and each other.
Wired clients, however, may only ping each other. They cannot reach the
server, nor the outside world.
I have followed the directions for FreeBSD 4 on
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html
So here is my /etc/sysctl.conf:
net.link.ether.bridge=1
net.link.ether.bridge_cfg="wi0,dc1"
net.inet.ip.forwarding=1
If anyone has any input it would be greatly appreciated.
-Walter Venable
討論串 (同標題文章)
完整討論串 (本文為第 1 之 12 篇)：