Re: Problem booting from release cdrom in VirtualPC for Mac
Output of the uname -a from what is currently running in VPC:
DragonFly-head# uname -a
DragonFly DragonFly-head.local 1.1-CURRENT DragonFly 1.1-CURRENT #0: Wed
Dec 1
01:24:33 GMT 2004
root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
i386
I know, its a fairly old CURRENT.
Raphael
Raphael Marmier wrote:
> I get a panic while booting with the release cdrom I built from
> RELEASE_1_2 tonight, both in default and safe modes:
>
> panic: pmap_bootstrap: no local apic!
> mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
>
>
>
>
> Fatal trap 12: page fault while in kernel mode
> mp_lock = 00000000; cpuid = 0; lapic.id = 00000000
> fault virtual address = 0x0
> fault code = supervisor read, page not present
> instruction pointer = 0x8:0xc03c3f4b
> stack pointer = 0x10:0xc0657b9c
> frame pointer = 0x10:0xc0657b9c
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, IOPL = 0
> current process = 0 (thread0)
> current thread = pri 44 (CRIT)
> interrupt mask = net tty bio cam <- SMP: XXX
> kernel: type 12 trap, code=0
>
>
> CPU0 stopping CPUs: 0x00000000
> stopped
> Stopped at 0xc03c3f4b: cmpb %al,0(%edx)
> db>
>
> when I try from the boot prompt, I get an infinite DB> prompt loop:
>
> OK lsmod
> 0x100000: /kernel (elf kernel, 0x533e50)
> args: -C
> modules: crypto.1 usb.1 pci.1 agp.1 pccard.1 wlan.1 if_faith.1
> procfs.1 cd9660
> .1 mpt.1 isp.1 sbp.1 fwe.1 firewire.1 ahd.1 ahd_pci.1 ahc.1 ahc_pci.1
> ahc_eisa.1
> exca.1 cardbus.1 cbb.1 scsi_low.1
> OK boot
> DB>
> DB>
> ...
>
>
> Raphael
討論串 (同標題文章)
完整討論串 (本文為第 2 之 9 篇)：