[問題] 請問我的BD燒錄機壞了嗎?

看板CD-R作者idiotwind (　)時間13年前 (2013/01/09 23:10)推噓2(2推 0噓 2→)

留言4則, 3人參與討論串1/1

1.機種(請PO型號)：Lite-On iHBS312 2 PL16 (ATAPI) 2.片子/來源 (片子請PO出光碟相關資訊和描述空片外觀，檔案或是影片請盡可能說明清楚)： 1. Melody 50G: http://ppt.cc/Z01y 2. VERBATIM 50G: http://ppt.cc/eQaa 3.燒錄/讀取速度：Melody:6x, VERBATIM:4x 4.使用軟體(註明版本)：ImgBurn 2.5.7.0 5.提供PC配備 MB(主機板型號廠牌):技嘉 H77-D3H POWER(廠牌瓦數):海韻 S12II 430W 作業系統(Linux, Windows, MacOS 版本):Windows 7 SP1 電腦年齡(剛組好的電腦或是用一陣子變這樣): 電腦組好約三個月, 之前都沒試燒過BD 6.錯誤訊息或症狀詳述(可以的話請附上詳細過程)：本來一開始用Melody的片燒, 一開始完全都不能燒, 也完全都讀不到片子, 後來將韌體升級之後才讀得到, 可也不是每片都讀得到, 有些可以有些不行, 然後讀得到的也不一定可以燒, 有出現過"Timeout on Logical Unit"和 "Power Calibration Area Error"的錯誤訊息可以燒的也有燒失敗過一片, 成功的有三片, 可是即便燒成功後卻不一定可以播放, 因為燒完後再重新把片子放進去又讀不到了, 之所以知道有燒成功是因為把片子放到藍光播放器是可以放的有換過I/O, 也有換過排線, 都是類似的情形然後今天再買了VERBATIM的來燒, 卻始終都燒不成功, 錯誤訊息如下: (VERBATIM的在燒時也有換排線跟I/O, 出現的訊息都一樣) http://ppt.cc/sJe3 error log: I 19:46:18 ImgBurn Version 2.5.7.0 started! I 19:46:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 19:46:18 Total Physical Memory: 8,280,304 KB - Available: 5,309,892 KB I 19:46:18 Initialising SPTI... I 19:46:18 Searching for SCSI / ATAPI devices... I 19:46:18 -> Drive 1 - Info: ATAPI iHBS312 2 PL16 (E:) (ATAPI) I 19:46:18 -> Drive 2 - Info: DVDFab Virtual Drive 1.1 (F:) (SCSI) I 19:46:18 -> Drive 3 - Info: DVDFab Virtual Drive 1.1 (G:) (SCSI) I 19:46:18 Found 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 19:47:43 Operation Started! I 19:47:43 Source File: J:\BD Movie\Tai.Chi.Hero.2012.BluRay.1080p.AVC.DTS-HDMA5.1.TrueHD5.1-CHDBits.iso I 19:47:43 Source File Sectors: 20,890,304 (MODE1/2048) I 19:47:43 Source File Size: 42,783,342,592 bytes I 19:47:43 Source File Volume Identifier: TAI CHI 2 I 19:47:43 Source File Volume Set Identifier: 0382F9E6 TAI CHI 2 I 19:47:43 Source File Application Identifier: RoviScenaristBD I 19:47:43 Source File Implementation Identifier: RoviScenaristBD571B38A I 19:47:43 Source File File System(s): UDF (2.50) I 19:47:43 Destination Device: [0:1:0] ATAPI iHBS312 2 PL16 (E:) (ATAPI) I 19:47:43 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) I 19:47:43 Destination Media Supported Write Speeds: 4x I 19:47:43 Destination Media Sectors: 24,438,784 I 19:47:43 Write Mode: BD I 19:47:43 Write Type: DAO I 19:47:43 Write Speed: MAX I 19:47:43 Hardware Defect Management Active: No I 19:47:43 BD-R Verify Not Required: Yes I 19:47:43 Link Size: Auto I 19:47:43 Lock Volume: Yes I 19:47:43 Test Mode: No I 19:47:43 OPC: No I 19:47:43 BURN-Proof: Enabled I 19:47:45 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x) I 19:47:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 19:48:52 Filling Buffer... (80 MB) I 19:48:54 Writing LeadIn... W 19:56:04 Failed to Write Sectors 2816 - 2847 - Reason: Invalid Address For Write W 19:56:04 Retrying (1 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (2 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (3 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (4 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (5 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (6 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (7 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (8 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (9 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (10 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (11 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (12 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (13 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (14 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (15 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (16 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (17 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (18 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (19 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (20 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:53 Retrying (21)... W 19:56:53 Retry Failed - Reason: Invalid Address For Write W 19:56:57 Retrying (22)... W 19:56:57 Retry Failed - Reason: Invalid Address For Write E 19:57:31 Failed to Write Sectors 2816 - 2847 - Reason: Invalid Address For Write E 19:57:31 Next Writable Address: 0 I 19:57:31 Synchronising Cache... W 19:58:04 User opted to skip the 'Close Track/Session/Disc' functions. E 19:58:04 Failed to Write Image! E 19:58:04 Operation Failed! - Duration: 00:10:20 I 19:58:04 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) 7.發問前做了多少功課.請先說清楚有更新韌體, 有換過I/O, 也有換過排線, 也用了兩種不同的片子, 卻始終燒得非常不順, 所以想問各位專家這種情況是不是燒錄機有問題, 如果是的話, Lite-On的送修要怎麼送修呢? 是不是只能請原購買店家送修? 請幫忙解惑, 謝謝!!! (參閱"[心得] 買來了燒錄機之後的二三事") -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 1.163.81.236

推

MixCopy

01/09 23:19, , 1^F

01/09 23:19, 1^F

→

MixCopy

01/09 23:20, , 2^F

01/09 23:20, 2^F

→

idiotwind

01/09 23:27, , 3^F

01/09 23:27, 3^F