[問題] spectre 模擬電容時出現error
最近有自己的工作站後
OS是使用centos 5.5
把原本的資料夾全部轉移到自己的工作站上
結果模擬時一直出錯
錯誤訊息如下
ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log
file input.ahdlSimDB/bsource_1.input.ahdlcmi/Linux2.6.18-194.el5+gcc/../ahdlcmi.out
for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL
0', and try again. If the reason for the failure was a syntax error, contact
your Cadence Customer Support representative with the netlist, log files,
behavioral model files, and any other information that can help identify the
problem.
Warning from spectre in `mimcap':`C0', during hierarchy flattening.
WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `temp' is not a valid parameter for an instance of
`bsource_1'. Ignored.
WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `tnom' is not a valid parameter for an instance of
`bsource_1'. Ignored.
WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_0' is not a valid parameter for an instance of
`bsource_1'. Ignored.
WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_1' is not a valid parameter for an instance of
`bsource_1'. Ignored.
WARNING (SFE-30):
"/home/7100064418/T018MMSP002K1/tsmc18rf/../skill/../models/spectre/rf018.scs"
19563: C0.cmim: `bs_par_2' is not a valid parameter for an instance of
`bsource_1'. Ignored.
Further occurrences of this warning will be suppressed.
拜託有經驗的高手幫忙一下 感激不盡
--
→
07/09 13:07,
07/09 13:07
→
07/09 13:08,
07/09 13:08
→
07/09 13:08,
07/09 13:08
推
07/09 13:10,
07/09 13:10
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.120.108.159
推
04/29 21:26, , 1F
04/29 21:26, 1F
→
04/30 10:27, , 2F
04/30 10:27, 2F
→
04/30 10:27, , 3F
04/30 10:27, 3F
推
05/01 01:32, , 4F
05/01 01:32, 4F
推
05/01 17:56, , 5F
05/01 17:56, 5F
→
05/01 17:56, , 6F
05/01 17:56, 6F