[問題]ADS2005元件的noise figure問題
請為大家..
我想用ADS2005去模擬一顆Bjt的NF
電路部份應該沒問題..但是我去模擬後出現錯誤訊息如下
varning detected by hpeesofsim during SP analysis `SP1'.
The simulation temperature (25.0 C) is not the same as the IEEE standard
noise temperature (290 K or 16.85 C) in the noise analysis `SP1'.
If the simulation temperature is not equal to the IEEE standard temperature,
then the loss and the noise figure will not agree for a passive circuit.
The `Temp' parameter on the Options item can be set to 16.85 C to
eliminate this warning message.
請問message所提的溫度要去哪裡設定呢??
裡頭所提的option是在哪裡呢??我怎麼找不到可以setting的地方
謝謝大家的幫忙...
RF菜鳥敬上
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 125.224.185.208
推
07/04 00:36, , 1F
07/04 00:36, 1F
→
07/04 00:38, , 2F
07/04 00:38, 2F
→
07/04 00:39, , 3F
07/04 00:39, 3F
→
07/04 01:03, , 4F
07/04 01:03, 4F