[教學] 更新Yosemeite後O2無線網卡與Vectorworks dongle啟用
※ 引述《Heatherting ( )》之銘言：
: 目前有兩台更新到OS 10.10 Yosemite都遇到很棘手的問題...
: 一台MacBook Air 1.3GHZ INTEL CORE i5更新後
: 使用德國的O2無線網卡則無法再連上網路
: 另一台則是Mac Pro本身安裝Vecorwork這套繪圖軟體
: 更新前有一個dongle解鎖的模擬器 使用上都沒問題
: 但再更新後就是讀取的到 可是都無法使用....
: 這種相容性的問題真的無解了嘛? T^T
: 再麻煩各位高手相救了!!
: 謝謝!
之前的兩個問題如上所述，
後來在本版與德國版發文後，入續得到解答!
首先關於Vectorwork的dongle，
感謝s8338127提供的消息: http://goo.gl/94wnPJ
我把Google翻譯後的英文貼在下面
After installing MacOS X Yosemite, it may happen that Vectorworks has stopped
running because the dongle is not found. It is recommended to reinstall the
current dongle driver in this case.
Download Link dongle driver:
http://downloads.computerworks.de/Sentin...me.dmg.zip
Alternatively you can download the driver directly from Sentinel:
http://sentinelcustomer.safenet-inc.com/...downloads/
Enter your search filter:
-User Category: "End User"
-Product: "Hasp HL" or "Hasp 4"
-Operating System: "Mac"
-Type: "Runtime & Device Driver"
-Language: "All"
Then "Search" and select this driver in the selection:
"Sentinel HASP / LDK Mac OS X Run-time GUI Installation"
Make the installation of the driver at the end.
而至於O2無線網卡的部分，
謝謝xcycl的資訊: 試試看這篇的解法 http://goo.gl/4OysJg
一樣把找到的解法在Google翻好英文後附在下面
Step 1:
Copy the file from HiLink Surf stick on the desk.
Step2:
Open the Finder, navigate to the desktop and choose the file.
About the gear, when selected file, select "Show Package Contents".
Step 4:
Choose where at Contents / Resources mbbserviceSetup.pkg the file. Click on
the gear again and select "Show Package Contents" from.
Step 5:
Select the file "Archive.pax.gz", this copy, please contact the location of
your choice. Preferably the desk.
Step 6:
Open the file with the archive program, so this is unpacked.
Step 7:
Open the terminal - (found under Applications / Utilities).
Navigate in the terminal to the location of the extracted file in the
unzipped folder .. In this case: "cd Desktop / archives". To restart the
device, type:
"Sudo ./mbbservice"
You will then be prompted for your password. Do not be alarmed: Here no stars
for each input are displayed. So you have to write almost blind.
Then it takes a few seconds, and the stick should be lit differently.
Check the status under http://192.168.8.1
Maybe even the two arrows must be pressed, you should not be connected.
The process with the Service must be performed after every reboot
unfortunately "
這兩個問題或許不多人碰到，
但很開心都能在板上得到解答，
所以就稍微整理一下放上來!
希望也能幫到有需要的人。 :)
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 140.113.45.203
※ 文章網址: http://www.ptt.cc/bbs/MAC/M.1414259501.A.2FA.html
推
10/27 04:30, , 1F
10/27 04:30, 1F