[問題] 筆電 裝顯卡驅動Geforce 630M 求救 謝謝
Linux distribution: Debian wheezy
Kernel: 3.8.5
環境:amd64
問題描述:安裝完nvidia顯示卡後,好像沒有正常運作,且genome工作不正常
狀況說明:
判斷1.
$ nvidia-setting
ERROR: Failed to create NV-CONTROL handle for screen 0.
進入設定解析度大小也沒反應
判斷2. 我認為是xorg.config檔沒有抓到nvidia顯示卡
----------------------------------xorg.config--------------------------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
.
.
略
.
.
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device" <==此內沒有VendorName:"nVidia Corporation"
Identifier "Card1" BordName:"GeForce 630M"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
.
.
略
.
.
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
.
.
略
.
.
------------------------------------------------------------------------------
請問如果我的想法正確的話,要如何才能抓到顯示卡?
經過的處理動作:
# X -configure
上面的xorg.config已經作過X -configure,不然原本連xorg都進不了
你想要大家幫你處理什麼:能正常啟用nvidia顯示卡
謝謝
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 36.239.236.195
推
04/05 11:35, , 1F
04/05 11:35, 1F
→
04/05 11:44, , 2F
04/05 11:44, 2F
→
04/05 12:32, , 3F
04/05 12:32, 3F
推
04/06 22:51, , 4F
04/06 22:51, 4F
→
04/06 22:52, , 5F
04/06 22:52, 5F
推
04/08 16:55, , 6F
04/08 16:55, 6F
→
04/08 16:55, , 7F
04/08 16:55, 7F
→
04/08 16:56, , 8F
04/08 16:56, 8F