[鍵盤] NuPhy Air75去年底前購買者可免費升級PCB

看板Key_Mou_Pad作者 (沉)時間1年前 (2022/09/28 20:59), 編輯推噓2(205)
留言7則, 3人參與, 1年前最新討論串1/1
我沒有買Air75,我買的是Halo65,不過剛好看到這則訊息就分享一下 簡單說就是NuPhy這家公司升級韌體,可以延長電池壽命跟一些快捷鍵的改善 但是只適用於2021/12/30以後購買的Air75,之前購買的不行 為了表示誠意他們提供兩個方案,第一個是購買舊的Air75的人 可以在9/30前寄信到 service@nuphy.com 索取新的PCB自行更換 如果不想更換的可以拿到$10美金的禮券 另外他們還透漏今年底明年出會在初一版新的Air75採用更好的MCU控制晶片 老實說大陸有這麼有良心的企業還真是出乎我意料之外 原文如下: On Sep 5th we celebrated the first anniversary of Air75’s release, and what a year it has been! Throughout the whole year, your enthusiasm and support continue unabated, as well as our dedication to tune, and optimize Air75 to its best. We have been paying close attention to feedbacks from the community, trying to listen to and understand each and every suggestion and opinion, and this is the best time, we believe, to give you an update on four things we have been working on and able to achieve with your valuable inputs. 1.The much awaited accessories are finally here! Head over to take a peek at the three flavors of the new Mono wrist rest, one acrylic, two hardwoods, all designed exclusively for Air75. Also fresh from the oven is the first set of shine-through keycaps for Air75, in a short time there will be many more to come, so stay tuned! 2. The Air75 firmware is now available for MacOS, bringing further optimizations to improve battery life, savable sidelight settings between power sessions, support for function keys/media keys behavior switching with the FN+TAB+F shortcut, and adjustment to the default Fn key behavior. Unfortunately, only Air75 ordered after Dec 30th, 2021, will be able to support the installation of Mac firmwares on a Mac device. For those Mac users whose purchases were made before Dec 30th, 2021, any firmware update have to be done on a Windows computer. 3.We understand and regret the situation these early supporters of us have to face, and therefore would like to offer two forms of compensations for them to choose. If you are an owner of Air75s bought before Dec 30th, 2021(hereafter known as ‘old Air75’), and would like free PCB replacements to use with Mac firmwares, please E-mail us at service@nuphy.com with your order details, and state the number of PCBs you want before Sep 30th, 2022. The shipping of all PCB replacement orders are scheduled between 10th and 15th of October. Alternatively, if for any reason you are not interested in a PCB replacement, you could get one $10 gift card code for each old Air75 you own by E-mailing us, or simply wait until 17th of October when we will automatically credit the accounts of all old Air75 owners with the corresponding number of $10 gift cards, which are stackable with other discount codes and gift cards. 4. During Air75's initital development, we prioritized the support of tri-mode connectivity in our selection of the controller chip, according to what we believed provided the best value to our users at the time. However, while our commitment to build on the current Air75 hardwares remain unchanged, it is becoming increasingly clear to us that its controller chip could not meet our customers' demand for greater customizability and better native OS support. Not only did we have to put on hold the implementations of many features, including drivers and NuPhy console for MacOS, which despite our sustained effort proved out of reach for this chip. The inability to streamline development and debugging process on this platform is costing us a lot of resources which could have been devoted to more useful efforts. We believe a fundamental change is in order, and are excited to share bits of info about our new MCU chip under testing, the new chip comes with support for up to 4 ‘layers’(the Fn1, Fn2, Tab and native layer respectively), 1,000Hz polling rate under 2.4 GHz, and better support for MacOS and Windows. After careful evaluation we have decided to base the next generation of Air75, scheduled to be released late 2022/early 2023 on this chip, with extra discounts provided to all Air75 owners. As we take up this project in earnest and see it through, we will provide regular updates to help you better follow our progress. The fellowship that made Air75 possible is invaluable to us, and we would like to build on it as we build new, fun pieces of hardware. Thank you for your attention and support. -- ※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 220.135.239.246 (臺灣) ※ 文章網址: https://www.ptt.cc/bbs/Key_Mou_Pad/M.1664369985.A.EE0.html

09/28 21:14, 1年前 , 1F
新增Air75壓克力、木頭、黑色木頭腕托
09/28 21:14, 1F

09/28 21:14, 1年前 , 2F
後面版本的PCB才支援macOS
09/28 21:14, 2F

09/28 21:14, 1年前 , 3F
所以有需要的可以索取新PCB or折價券
09/28 21:14, 3F

09/28 21:14, 1年前 , 4F
未來的版本有四層,預設、FN1、FN2、Tab
09/28 21:14, 4F

09/28 21:14, 1年前 , 5F
感覺新MCU版很值得期待啊
09/28 21:14, 5F

09/29 09:19, 1年前 , 6F
我淘寶買的,不知道能不能補寄。
09/29 09:19, 6F

09/29 11:32, 1年前 , 7F
只要有證明,寄email給他們都可以
09/29 11:32, 7F
文章代碼(AID): #1ZD4L1xW (Key_Mou_Pad)