[理工] [電子]一個回授觀念問題

看板Grad-ProbAsk作者 (Avanlandis)時間14年前 (2012/03/21 11:52), 編輯推噓1(105)
留言6則, 2人參與, 最新討論串1/1
各位好! 附上這段敘述的圖片http://i.imgur.com/iBALe.jpg
敘述如下: 前文大概是說 這裡的回授分析方法是在假設(幾乎)所有的前授transmission 都出現在basic amplifier端,且(幾乎)所有的回授transmission都出現在 回授網路。(怕我個人有曲解意思附上原文一下..) 原文: The feedback analysis method is predicated on the assumption that all (or most) of the feedforward transmission occurs in the basic amplifier and all(or most) of the feedback transmission occurs in the feedback network. 然後我有問題是在後面的其中一小段敘述.. Also,as long as gm is much larger than 1/Rf, the assumption that most of the feedforward transmission occurs in the basic amplifier is valid,and thus the feedback analysis is reasonably accurate. 問題點:為何只要gm >> 1/Rf,則前授大部分會出現在基本放大器的假設 就會成立? 那如果要feedback的假設→feedback transmission(幾乎)都傳到 回授網路端也成立的話..條件又是什麼呢? (第一次讀回授這一塊觀念還不是很清楚!還希望各位高手指導一下!!感謝!) -- 慵懶地望著天空,奢望自己能更堅強 人生..何嘗不就是不斷的擺脫眼前的阻撓 然而,終究有天得回歸原本的最初~ -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 1.175.128.231 ※ 編輯: kela12340 來自: 1.175.128.231 (03/21 11:55)

03/21 17:32, , 1F
你可以把1/Rf想成另一個gm值(∵Rf值越小,經過Rf電流越大)
03/21 17:32, 1F

03/21 17:34, , 2F
只要放大器的gm>1/Rf,則Feedforward可視為Amp獨自貢獻
03/21 17:34, 2F

03/21 17:36, , 3F
事實上Rf對Vout有前饋貢獻,一般因計算太複雜不考慮.
03/21 17:36, 3F

03/21 17:41, , 4F
另外feedback公式成立條件:訊號必全流過β網路(ie,電流無
03/21 17:41, 4F

03/21 17:41, , 5F
分流,電壓無耗損)
03/21 17:41, 5F

03/21 22:31, , 6F
感謝!
03/21 22:31, 6F
文章代碼(AID): #1FQL2BD_ (Grad-ProbAsk)