Re: 9.2 Boot Problem

On 9 April 2014, at 14:37, "Chris H" <bsd-lists@bsdforge.com> wrote:

>> 
>> On 9 April 2014, at 13:40, Tim Daneliuk <tundra@tundraware.com> wrote:
>> 
>>> Make sure there is a /dev directory on the disk for the kernel to populate. Without it,
>>> the kernel will hang.
>> 
>> 
>> The disk does have a /dev directory.  The system boots fine after you enter a return.  It
>> hangs waiting for a return on the keyboard.
>> 
>> This last time I used in /boot/loader.conf:
>> 
>> zool# more loader.conf
>> verbose_loading="YES"
>> boot_verbose="YES"
>> loader_color="NO"
>> loader_logo="beastiebw"
>> autoboot_delay="10"
>> 
>> 
>> System behaved the same on boot other than the menu was complete.  However, I did see
>> something flash on the left bottom of the screen where the Autoboot message normally is.  It
>> was cleared immediately after it was written so there was no way to read it.  Note, this is
>> on the serial console.  I have not seen that before, but it might have been there.  It was
>> just a flash.  I am wondering if something is doing the equivalent of pressing the space bar
>> after the autoboot message is displayed.
>> 
>> I checked and the /boot/defaults/loader.conf file is identical between the system that works
>> and those that do not.
> 
> 
>> I am going to see if the terminal emulator can disable the screen
>> control functions so I can see what the message that flashes by is.
> dmesg(8) is your friend (/var/run/dmesg.boot). See also /var/log/messages
> 
> --Chris
> 
> P.S. You only need loader_logo="beastiebw" to get a B/W console.

dmesg starts after the boot begins.  This problem occurs before that.  Similar issue for console.log and messages.  

_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"