Re: ata: SIGNATURE: ffffffff

* George Kontostanos <gkontos.mail@gmail.com> [2011-06-22 19:58:50 +0300]:

> I have also changed the SATA port in the controller!
> 
> I am afraid that I might get a new controller and still have the same
> issues. I just want to eliminate any other options first.
> 

Don't top post, it's against list policy. See my siganture for a 
reasonable reason why. 

Replace the port or just moved the drive to an unused port? Or did you 
physically remove the card and solder a new SATA Female port to your 
card (which I would imagine would violate/void your warranty on the 
card.

Essentially this is what you've done so far:

    1. Changed drives
    2. Changed SATA Cable
    3. Moved to an unused port

To be perfectly honest, it sounds like a faulty card, which was my 
original assessment. First I would see replacement on the same card 
under the warranty, if it still produces a problem, I would change 
cards. There is a slim chance it could also be a driver issue.

-- 
> Chris Brennan
> -- 
> A: Yes.
> >Q: Are you sure?
> >>A: Because it reverses the logical flow of conversation.
> >>>Q: Why is top posting frowned upon?
> http://xkcd.com/84/ | http://xkcd.com/149/ | http://xkcd.com/549/
> GPG: D5B20C0C (6741 8EE4 6C7D 11FB 8DA8  9E4A EECD 9A84 D5B2 0C0C)
-----------------------------------------------------------------------
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"