Re: Fresh installed Freebsd 9 don't boot from hd
--W2IRJ2e1E3eviBXu
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Fri, Oct 21, 2011 at 10:58:51AM +0200, Dennis Koegel wrote:
> On Thu, Oct 20, 2011 at 11:28:08AM +0400, Pavel Timofeev wrote:
> > I used FreeBSD 9 amd64 on my HP Proliant DL360 G5 (smart array p400i mi=
rror)
> > as test. [...]
> > It was fresh install and I choose guided partitioning (GPT)
> > But after reboot my server don't boot from hd.
>=20
> We have the same issue on a DL580 G7. Install runs fine, but when it's
> time for the first boot, the bootcode emits a single '-' (where usually
> it would be "spinning" for a moment while loading), hangs for about two
> seconds, and then reboots.
>=20
> I've used the BETA3 bsdinstall on other (amd64) hardware with GPT and it
> worked fine. Also, manually adding the GPT label, partitions and
> bootcode using gpart, then rebooting, shows the exact same behaviour
> (this was done using the BETA3 "Live CD").
>=20
> I suspect it's something in the vicinity of "pmbr bootcode vs. newer
> HP BIOS".
>=20
> (BTW, not related to this issue: hw.memtest.tests=3D0 should be default.
> The kernel on a system with 128 GB of RAM needs about two minutes (!)
> before emitting a single line of output. At first we didn't know about
> this test and thought there was a serious problem.)
Or at least there should be a message that the memtest is running...
--W2IRJ2e1E3eviBXu
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (FreeBSD)
iEYEARECAAYFAk6hUuIACgkQKc512sD3afg1SACfYM9YpwPzv/BFT9yaWfgBC4vr
KuMAn2R4uyhaSZy0qcBA4CfKP3J46syW
=SOFa
-----END PGP SIGNATURE-----
--W2IRJ2e1E3eviBXu--
討論串 (同標題文章)
完整討論串 (本文為第 5 之 29 篇)：