kern/179299: Intel X540-T2 - unstable driver

看板FB_bugs作者時間11年前 (2013/06/05 02:01), 編輯推噓0(0推 0噓 0→)
留言0則, 0人參與, 最新討論串1/1
>Number: 179299 >Category: kern >Synopsis: Intel X540-T2 - unstable driver >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jun 04 13:50:00 UTC 2013 >Closed-Date: >Last-Modified: >Originator: Maxim >Release: 9.1-STABLE >Organization: >Environment: FreeBSD nfs2 9.1-STABLE FreeBSD 9.1-STABLE #1: Tue May 21 21:42:21 CEST 2013 root@nfs2:/usr/obj/usr/src/sys/GENERIC amd64 >Description: Hi, I have two machines with Intel X540-T2 (dual-port 10Gb NIC). NIC seems to be unstable after reboot - it sporadically responses to ICMP PING requests. ECHO REQUEST packets seems to show up, but not all of them(tcpdump). NIC is connected to a 1Gb HP switch. Machines have PF with 'pass all' active and PFSync(master/backup CARP setup). After 'ifconfig ix0 down' and 'ifconfig ix0 up' it starts to replay to ICMP requests, but after some time machine stops responding again. After some time NICs seems to come back again. There is no firewall in between testing and tested systems. Same testing done from other machines on the network with same result. Dmesg below: Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-STABLE #1: Tue May 21 21:42:21 CEST 2013 root@nfs2:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (2000.05-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206d7 Family = 0x6 Model = 0x2d Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 68736253952 (65552 MB) avail memory = 66171219968 (63105 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 cpu8 (AP): APIC ID: 8 cpu9 (AP): APIC ID: 9 cpu10 (AP): APIC ID: 10 cpu11 (AP): APIC ID: 11 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 Event timer "HPET7" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0 pci2: <ACPI PCI bus> on pcib2 igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0xe020-0xe03f mem 0xfb820000-0xfb83ffff,0xfb844000-0xfb847fff irq 27 at device 0.0 on pci2 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 00:25:90:c0:16:ac igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0xe000-0xe01f mem 0xfb800000-0xfb81ffff,0xfb840000-0xfb843fff irq 30 at device 0.1 on pci2 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 00:25:90:c0:16:ad igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 0 igb1: Bound queue 5 to cpu 1 igb1: Bound queue 6 to cpu 2 igb1: Bound queue 7 to cpu 3 pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0 pci4: <ACPI PCI bus> on pcib3 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.7 - STABLE/9> mem 0xf9800000-0xf99fffff,0xf9a04000-0xf9a07fff irq 36 at device 0.0 on pci4 ix0: Using MSIX interrupts with 9 vectors ix0: Ethernet address: a0:36:9f:1a:15:38 ix0: PCI Express Bus: Speed 5.0Gb/s Width x8 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.7 - STABLE/9> mem 0xf9600000-0xf97fffff,0xf9a00000-0xf9a03fff irq 32 at device 0.1 on pci4 ix1: Using MSIX interrupts with 9 vectors ix1: Ethernet address: a0:36:9f:1a:15:3a ix1: PCI Express Bus: Speed 5.0Gb/s Width x8 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0 pci6: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0 pci7: <ACPI PCI bus> on pcib5 mps0: <LSI SAS2308> port 0xd000-0xd0ff mem 0xfb740000-0xfb74ffff,0xfb700000-0xfb73ffff irq 40 at device 0.0 on pci7 mps0: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pci0: <base peripheral> at device 4.0 (no driver attached) pci0: <base peripheral> at device 4.1 (no driver attached) pci0: <base peripheral> at device 4.2 (no driver attached) pci0: <base peripheral> at device 4.3 (no driver attached) pci0: <base peripheral> at device 4.4 (no driver attached) pci0: <base peripheral> at device 4.5 (no driver attached) pci0: <base peripheral> at device 4.6 (no driver attached) pci0: <base peripheral> at device 4.7 (no driver attached) pci0: <base peripheral> at device 5.0 (no driver attached) pci0: <base peripheral> at device 5.2 (no driver attached) pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 pci8: <ACPI PCI bus> on pcib6 isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xc000-0xc0ff mem 0xf947c000-0xf947ffff,0xf9000000-0xf93fffff irq 16 at device 0.0 on pci8 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb923000-0xfb9233ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci9: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci10: <ACPI PCI bus> on pcib8 pcib9: <PCI-PCI bridge> at device 0.0 on pci10 pci11: <PCI bus> on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 on pci11 pci12: <PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 0.0 on pci12 pci13: <PCI bus> on pcib11 vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfb000000-0xfb003fff,0xfa800000-0xfaffffff irq 19 at device 0.0 on pci13 pcib12: <PCI-PCI bridge> at device 1.0 on pci11 pci14: <PCI bus> on pcib12 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb922000-0xfb9223ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci15: <ACPI PCI bus> on pcib13 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfb921000-0xfb9217ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <dasp> at device 31.6 (no driver attached) pcib14: <ACPI Host-PCI bridge> on acpi0 pci255: <ACPI PCI bus> on pcib14 pci255: <base peripheral> at device 8.0 (no driver attached) pci255: <base peripheral> at device 8.3 (no driver attached) pci255: <base peripheral> at device 8.4 (no driver attached) pci255: <base peripheral> at device 9.0 (no driver attached) pci255: <base peripheral> at device 9.3 (no driver attached) pci255: <base peripheral> at device 9.4 (no driver attached) pci255: <base peripheral> at device 10.0 (no driver attached) pci255: <base peripheral> at device 10.1 (no driver attached) pci255: <base peripheral> at device 10.2 (no driver attached) pci255: <base peripheral> at device 10.3 (no driver attached) pci255: <base peripheral> at device 11.0 (no driver attached) pci255: <base peripheral> at device 11.3 (no driver attached) pci255: <base peripheral> at device 12.0 (no driver attached) pci255: <base peripheral> at device 12.1 (no driver attached) pci255: <base peripheral> at device 12.2 (no driver attached) pci255: <base peripheral> at device 12.6 (no driver attached) pci255: <base peripheral> at device 12.7 (no driver attached) pci255: <base peripheral> at device 13.0 (no driver attached) pci255: <base peripheral> at device 13.1 (no driver attached) pci255: <base peripheral> at device 13.2 (no driver attached) pci255: <base peripheral> at device 13.6 (no driver attached) pci255: <base peripheral> at device 14.0 (no driver attached) pci255: <dasp> at device 14.1 (no driver attached) pci255: <base peripheral> at device 15.0 (no driver attached) pci255: <base peripheral> at device 15.1 (no driver attached) pci255: <base peripheral> at device 15.2 (no driver attached) pci255: <base peripheral> at device 15.3 (no driver attached) pci255: <base peripheral> at device 15.4 (no driver attached) pci255: <base peripheral> at device 15.5 (no driver attached) pci255: <base peripheral> at device 15.6 (no driver attached) pci255: <base peripheral> at device 16.0 (no driver attached) pci255: <base peripheral> at device 16.1 (no driver attached) pci255: <base peripheral> at device 16.2 (no driver attached) pci255: <base peripheral> at device 16.3 (no driver attached) pci255: <base peripheral> at device 16.4 (no driver attached) pci255: <base peripheral> at device 16.5 (no driver attached) pci255: <base peripheral> at device 16.6 (no driver attached) pci255: <base peripheral> at device 16.7 (no driver attached) pci255: <base peripheral> at device 17.0 (no driver attached) pci255: <base peripheral> at device 19.0 (no driver attached) pci255: <dasp> at device 19.1 (no driver attached) pci255: <dasp> at device 19.4 (no driver attached) pci255: <dasp> at device 19.5 (no driver attached) pci255: <base peripheral> at device 19.6 (no driver attached) acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 est8: <Enhanced SpeedStep Frequency Control> on cpu8 p4tcc8: <CPU Frequency Thermal Control> on cpu8 est9: <Enhanced SpeedStep Frequency Control> on cpu9 p4tcc9: <CPU Frequency Thermal Control> on cpu9 est10: <Enhanced SpeedStep Frequency Control> on cpu10 p4tcc10: <CPU Frequency Thermal Control> on cpu10 est11: <Enhanced SpeedStep Frequency Control> on cpu11 p4tcc11: <CPU Frequency Thermal Control> on cpu11 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ses0 at mps0 bus 0 scbus0 target 20 lun 0 ses0: <LSI CORP SAS2X36 0717> Fixed Enclosure Services SCSI-5 device ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device da3 at mps0 bus 0 scbus0 target 8 lun 0 da3: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da4 at mps0 bus 0 scbus0 target 9 lun 0 da4: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da5 at mps0 bus 0 scbus0 target 10 lun 0 da5: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da8 at mps0 bus 0 scbus0 target 13 lun 0 da8: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da6 at mps0 bus 0 scbus0 target 11 lun 0 da6: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da10 at mps0 bus 0 scbus0 target 15 lun 0 da10: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da10: 600.000MB/s transfers da10: Command Queueing enabled da10: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da12 at mps0 bus 0 scbus0 target 17 lun 0 da12: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da12: 600.000MB/s transfers da12: Command Queueing enabled da12: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da11 at mps0 bus 0 scbus0 target 16 lun 0 da11: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device da11: 600.000MB/s transfers da11: Command Queueing enabled da11: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da7 at mps0 bus 0 scbus0 target 12 lun 0 da7: <SEAGATE ST9900805SS 0004> Fixed Direct Access SCSI-6 device da7: 600.000MB/s transfers da7: Command Queueing enabled da7: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da9 at mps0 bus 0 scbus0 target 14 lun 0 da9: <SEAGATE ST9900805SS 0002> Fixed Direct Access SCSI-6 device da9: 600.000MB/s transfers da9: Command Queueing enabled da9: 858483MB (1758174768 512 byte sectors: 255H 63S/T 109441C) da13 at mps0 bus 0 scbus0 target 18 lun 0 da13: <SEAGATE ST100FM0002 0003> Fixed Direct Access SCSI-5 device da13: 600.000MB/s transfers da13: Command Queueing enabled da13: 95396MB (195371568 512 byte sectors: 255H 63S/T 12161C) da14 at mps0 bus 0 scbus0 target 19 lun 0 da14: <SEAGATE ST100FM0002 0003> Fixed Direct Access SCSI-5 device da14: 600.000MB/s transfers da14: Command Queueing enabled da14: 95396MB (195371568 512 byte sectors: 255H 63S/T 12161C) ses0: pass3,da3: Element descriptor: 'Slot 01' ses0: pass3,da3: SAS Device Slot Element: 1 Phys at Slot 0 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005f32bbc6 ses0: pass4,da4: Element descriptor: 'Slot 02' ses0: pass4,da4: SAS Device Slot Element: 1 Phys at Slot 1 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c50059ae2c56 ses0: pass5,da5: Element descriptor: 'Slot 03' ses0: pass5,da5: SAS Device Slot Element: 1 Phys at Slot 2 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005a20f0de ses0: pass6,da6: Element descriptor: 'Slot 04' ses0: pass6,da6: SAS Device Slot Element: 1 Phys at Slot 3 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005f32bcbe ses0: pass7,da7: Element descriptor: 'Slot 05' ses0: pass7,da7: SAS Device Slot Element: 1 Phys at Slot 4 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005f278dce ses0: pass8,da8: Element descriptor: 'Slot 06' ses0: pass8,da8: SAS Device Slot Element: 1 Phys at Slot 5 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005a1f3cf2 ses0: pass9,da9: Element descriptor: 'Slot 07' ses0: pass9,da9: SAS Device Slot Element: 1 Phys at Slot 6 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005a20e6c2 da0 at mps0 bus 0 scbus0 target 0 lun 0 da0: <ATA INTEL SSDSC2CW18 400i> Fixed Direct Access SCSI-6 device da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 171705MB (351651888 512 byte sectors: 255H 63S/T 21889C) da1 at mps0 bus 0 scbus0 target 1 lun 0 da1: <ATA INTEL SSDSC2CW06 400i> Fixed Direct Access SCSI-6 device da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 57241MB (117231408 512 byte sectors: 255H 63S/T 7297C) da2 at mps0 bus 0 scbus0 target 2 lun 0 da2: <ATA INTEL SSDSC2CW06 400i> Fixed Direct Access SCSI-6 device da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 57241MB (117231408 512 byte sectors: 255H 63S/T 7297C) ses0: pass10,da10: Element descriptor: 'Slot 08' ses0: pass10,da10: SAS Device Slot Element: 1 Phys at Slot 7 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005a17647a ses0: pass11,da11: Element descriptor: 'Slot 09' ses0: pass11,da11: SAS Device Slot Element: 1 Phys at Slot 8 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005f3784ee ses0: pass12,da12: Element descriptor: 'Slot 10' ses0: pass12,da12: SAS Device Slot Element: 1 Phys at Slot 9 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c5005a20ea5a ses0: pass13,da13: Element descriptor: 'Slot 23' ses0: pass13,da13: SAS Device Slot Element: 1 Phys at Slot 22 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c50030105af6 ses0: pass14,da14: Element descriptor: 'Slot 24' ses0: pass14,da14: SAS Device Slot Element: 1 Phys at Slot 23 ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50030480014028ff addr 5000c50030105b3e SMP: AP CPU #1 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #11 Launched! Swap zone entries reduced from 8127319 to 5418212. Timecounter "TSC" frequency 2000045124 Hz quality 1000 ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered Root mount waiting for: usbus1 usbus0 uhub3: 8 ports with 8 removable, self powered ugen0.3: <American Megatrends Inc.> at usbus0 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 ums0: <Mouse Interface> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 Trying to mount root from ufs:/dev/da0p2 [rw]... igb0: link state changed to UP lagg0: link state changed to UP igb1: link state changed to UP carp0: INIT -> BACKUP ix0: link state changed to UP carp0: link state changed to DOWN carp0: link state changed to UP igb1: link state changed to DOWN igb0: link state changed to DOWN lagg0: link state changed to DOWN igb1: link state changed to UP lagg0: link state changed to UP igb0: link state changed to UP igb1: link state changed to DOWN igb0: link state changed to DOWN lagg0: link state changed to DOWN igb0: link state changed to UP lagg0: link state changed to UP igb1: link state changed to UP ix1: link state changed to UP igb0: link state changed to DOWN igb1: link state changed to DOWN lagg0: link state changed to DOWN igb1: link state changed to UP lagg0: link state changed to UP igb0: link state changed to UP ix1: link state changed to DOWN igb0: link state changed to DOWN igb1: link state changed to DOWN lagg0: link state changed to DOWN igb0: link state changed to UP lagg0: link state changed to UP igb1: link state changed to UP ix1: link state changed to UP igb1: link state changed to DOWN igb0: link state changed to DOWN lagg0: link state changed to DOWN igb1: link state changed to UP lagg0: link state changed to UP igb0: link state changed to UP igb1: link state changed to DOWN igb0: link state changed to DOWN lagg0: link state changed to DOWN igb1: link state changed to UP lagg0: link state changed to UP igb0: link state changed to UP igb1: link state changed to DOWN igb0: link state changed to DOWN lagg0: link state changed to DOWN ix1: link state changed to DOWN ix1: link state changed to UP ix1: link state changed to DOWN igb1: link state changed to UP lagg0: link state changed to UP igb0: link state changed to UP ix1: link state changed to UP carp0: MASTER -> BACKUP (more frequent advertisement received) carp0: link state changed to DOWN carp0: link state changed to UP carp0: MASTER -> BACKUP (more frequent advertisement received) carp0: link state changed to DOWN ugen1.3: <Logitech> at usbus1 ukbd1: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1 kbd3 at ukbd1 uhid0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1 carp0: link state changed to DOWN carp0: INIT -> BACKUP carp0: link state changed to DOWN ix0: link state changed to DOWN carp0: link state changed to DOWN carp0: INIT -> BACKUP ix0: link state changed to UP carp0: link state changed to DOWN >How-To-Repeat: Test to reboot and PING a system with X540-T2 connected to a 1Gb switch. >Fix: >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ freebsd-bugs@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org"
‣ 更多 sysop. 的文章
文章代碼(AID): #1HhYjVLc (FB_bugs)