Re: I/O errors on Hammer volume
:I have included the most relevant part of the output of
:"smartctl -d sat -a /dev/da0" below:
:
:SMART Attributes Data Structure revision number: 16
:Vendor Specific SMART Attributes with Thresholds:
:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
:..
:193 Load_Cycle_Count 0x0032 147 147 000 Old_age Always - 160820
:
:--
:Francois Tigeot
:
That's all normal except the Load_Cycle_Count is excessive. But
the Load_Cycle_Count is somewhat dependent on the manufacturer
and I don't see any errors reported in the output.
Another thing you can do is run 'hammer -f <device> show | less -B'
and search for lines beginning with the character 'B'. You would
type slash-carrot-B into LESS. The hammer show command checks
for problems.
-Matt
Matthew Dillon
<dillon@backplane.com>
討論串 (同標題文章)
完整討論串 (本文為第 6 之 18 篇)：