Boot panic w/HEAD sources from ~4 hours ago. (amd related me thi
OK boot
/modules/acpi.ko text=0x42a98 data=0x1cd4+0x878 syms=[0x4+0x6e30+0x4+0x7f65]
SMAP type=01 base=00000000 00000000 len=00000000 00093c00
SMAP type=02 base=00000000 00093c00 len=00000000 0000c400
SMAP type=02 base=00000000 000e0000 len=00000000 00020000
SMAP type=01 base=00000000 00100000 len=00000000 0fec0000
SMAP type=03 base=00000000 0ffe0000 len=00000000 00018000
SMAP type=04 base=00000000 0fff8000 len=00000000 00008000
SMAP type=03 base=00000000 0ffc0000 len=00000000 00020000
SMAP type=02 base=00000000 ffb80000 len=00000000 00080000
SMAP type=02 base=00000000 fff00000 len=00000000 00100000
Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.1-CURRENT #0: Tue Oct 19 14:14:24 GMT 2004
root@dragonfly.gactr.uga.edu:/usr/obj/usr/src/sys/dragonfly
Calibrating clock(s) ... TSC clock: 99670
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel Pentium III (996.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
A
T,PSE36,MMX,FXSR,SSE>
real memory = 268173312 (261888K bytes)
Physical memory chunk(s):
0x00001000 - 0x00092fff, 598016 bytes (146 pages)
0x00474000 - 0x0ffb7fff, 263471104 bytes (64324 pages)
avail memory = 253468672 (247528K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda60
bios32: Entry = 0xfda74 (c00fda74) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xda95
pnpbios: Found PnP BIOS data at 0xc00f26a0
pnpbios: Entry = f0000:1f5a Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc0447000.
Preloaded elf module "/modules/linux.ko" at 0xc0447238.
link_elf: symbol vn_lock undefined
Preloaded elf module "/modules/if_fxp.ko" at 0xc04472e0.
Preloaded elf module "/modules/miibus.ko" at 0xc0447388.
Preloaded elf module "/modules/snd_es137x.ko" at 0xc0447430.
Preloaded elf module "/modules/snd_pcm.ko" at 0xc04474dc.
Preloaded elf module "/modules/accf_data.ko" at 0xc0447584.
Preloaded elf module "/modules/accf_http.ko" at 0xc0447630.
Preloaded elf module "/modules/acpi.ko" at 0xc04476dc.
Leaving critical section, allowing interrupts
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac0
pci_open(1a): mode1res=0x8000
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2c30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 C 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 9 A 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 9 B 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 9 C 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 9 D 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 10 A 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 10 B 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 10 C 0x61 3 4 5 6 7 9
slot 2 2 10 D 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 11 A 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 11 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 11 C 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 11 D 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 12 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 12 B 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 12 C 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 12 D 0x6b 3 4 5 6 7 9
slot 5 2 13 A 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 13 B 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 13 C 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 13 D 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 7 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
acpi0: <DELL ZUUL> on motherboard
installed MI handler for in
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x1130, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1131, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x244e, revid=0x02
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x2440, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x8086, dev=0x244b, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ef80, size 5
found-> vendor=0x8086, dev=0x2442, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=3
map[20]: type 1, range 32, bas
found-> vendor=0x8086, dev=0x2443, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff
at
device 0.0 on pci0
agp0: allocating GATT for aperture of size 36M
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0xfc500000-0xfc5fffff
pcib1: prefetched decode 0xf4200000-0xf42fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device
30
..0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfc600000-0xfeafffff
pcib2: prefetched decode 0xf4300000-0xf43fffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 0000d800, size 8
map[18]: type 1, range 32, base feaff000, size 12
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=2, slot=9, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base feafe000, size 12
map[14]: type 1, range 32, base 0000df00, size 6
map[18]: type 1, range 32
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=2, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000dc00, size 7
found-> vendor=0x1022, dev=0x2020, revid=0x10
bus=2, slot=11, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 0000de80, size 6
found-> vendor=0x1274, dev=0x1371, revid=0x09
bus=2, slot=12, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
pci2: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 9.0
ir
q 11
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdf00-0xdf3f mem
0xfe900000-0xfe9ffff
f,0xfeafe000-0xfeafefff irq 11 at device 10.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xfeafe000-0xfeafefff
fxp0: using memory space regi
installed MI handler for int 11
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp0: MAC address: 00:90:27:66:67:f3
amd0: <Tekram DC390(T)/AMD53c974 SCSI Host Adapter> port 0xdc00-0xdc7f irq 9
at
device 11.0 on pci2
pcib2: device amd0 requested decoded I/O range 0xdc00-0xdc7f
using shared irq9.
pcm0: <AudioPCI ES1371-B> port 0xde80-0xdebf irq 10 at device 12.0 on pci2
pcib2: device pcm0 requested decoded I/O range 0xde80-0xdebf
pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525914)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume,
Cry
stal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
installed MI handler for int 10
pcm0: sndbuf_setmap e7f2000, 1000; 0xcd831000 -> e7f2000
pcm0: sndbuf_setmap e834000, 1000; 0xcd833000 -> e834000
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on
pci
0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=10
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq
3
at device 31.2 on pci0
installed MI handler for int 3
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self pow
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 00 64
psm: status 00 00 64
psm: status 00 00 64
psm: status 00 00 64
psm: data ffffffff 00 64
psm: status 00 00 64
psm: status 00 00 64
psm: data ffffffff 00 64
psm0: failed to get data.
psm: status 00 00 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator:
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
sio1 failed to probe at port 0x
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
installed MI handler for int 7
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
installed MI handler for int 0
bpf: lo0 attached
ad0: success setting UDMA5 on Intel chip
ar: FreeBSD check1 failed
ad0: <Maxtor 5T020H2/TAH71DP0> ATA-6 disk at ata0-master
ad0: 19073MB (39062500 sectors), 38752 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-slave: piomode=3 dmamode=1 udmamode=2 dmaflag=1
ata0-slave: success setting PIO3 on generic chip
afd0: <IOMEGA ZIP 250 ATAPI Floppy/41.S> rewriteable drive at ata0 as slave
afd0: 0MB (0 sectors), 0 cyls, 64 heads, 32 S/T, 512 B/S
afd0: 4096KB/s, PIO3
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
ata1-master: success setting PIO4 on generic chip
acd0: read 8268KB/s (4782KB/s), 120KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x4
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc026935f
stack pointer = 0x10:0xc0f5bc90
frame pointer = 0x10:0xc0f5bcc4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = Idle
current thread = pri 14
interrupt mask =
kernel: type 12 trap, code=2
Stopped at bus_dmamap_load+0x1ab: movl $0,0x4(%esi)
db> trace
bus_dmamap_load(c5f45bb8,c0324ce0,c9782cfc,24,c0218e58,cd8a0290,0) at
bus_dmamap
_load+0x1ab
amd_action(c1043b28,ce23c038,c9782c78,1,6c0000) at amd_action+0x154
xpt_run_dev_sendq(c1002518) at xpt_run_dev_sendq+0x1cb
xpt_release_devq_device(c9782c78,1,1,c0f5bd84,c018d757) at
xpt_release_devq_devi
ce+0xd5
xpt_release_devq_timeout(c9782c78) at xpt_release_devq_timeout+0xf
softclock_handler(c030d400,0,0,0,0) at softclock_handler+0xe3
lwkt_exit() at lwkt_exit
db> p
C026935f
db> x
bus_dmamap_load+0x1ab: 446c7
db> ps
pid proc addr uid ppid pgrp flag stat wmesg wchan cmd
1 c5f13e00 c5f1fda0 0 0 0 000204 1 swapper
0 c02de200 c0469da0 0 0 0 000204 3 conifhk c02e5860 swapper
cpu 0 tdrunqmask 00004000 curthread 0xc030d414 reqflags 0012
uschedcp 0 (-1) upri 0
INCOMMING IPIQS:
tdq thread pid flags pri(act) sp wmesg comm
14 0xc030d414 -1 00010c03 14( 14) 0xc0f5bd34 - softclock 0
14 0xc0306980 -1 00010c02 110( 14) 0xcd8d3d0c - ithread 16
tdq thread pid flags pri(act) sp wmesg comm
32 0xff80034c -1 00000000 44( 12) 0xff807d48 - idle_0
32 0xc02de380 0 00000000 108( 12) 0xc0469ce0 conifhk swapper
32 0xc030d414 -1 00010c03 14( 14) 0xc0f5bd34 - softclock 0
32 0xc0306cc0 -1 00010c00 110( 14) 0xc0f5ed88 - ithread 20
32 0xc5f1cec0 1 00000600 42( 10) 0xc5f1fd3c - swapper
32 0xc0306d90 -1 00010c00 110( 14) 0xc6cfcd88 - ithread 21
32 0xc5f1cde0 -1 00000e00 76( 12) 0xc6cffcf0 tqthr taskqueue
32 0xc0306b20 -1 00010c00 110( 14) 0xc7709d88 - ithread 18
32 0xc0306bf0 -1 00010c00 110( 14) 0xc770cd88 - ithread 19
32 0xc03063d0 -1 00010c00 124( 28) 0xc7714d88 - ithread 9
32 0xc5f1cd00 -1 00040e00 76( 12) 0xc7717d10 - acpi_task
32 0xc0306570 -1 00010c00 124( 28) 0xc771bd88 - ithread 11
32 0xc03064a0 -1 00010c00 124( 28) 0xc771ed88 - ithread 10
32 0xc03067e0 -1 00010c00 124( 28) 0xcd83bd0c - ithread 14
32 0xc03068b0 -1 00010c00 124( 28) 0xcd8b9d0c - ithread 15
32 0xc0305ef0 -1 00010c00 124( 28) 0xcd8bcd88 - ithread 3
32 0xc5f1cc20 -1 00000e00 76( 12) 0xcd8c5ce0 usbdly usb0
32 0xc5f1cb40 -1 00000e00 76( 12) 0xcd8c8cec usbtsk usbtask
32 0xc0306640 -1 00010c00 124( 28) 0xcd8cbd88 - ithread 12
32 0xc0306160 -1 00010c00 124( 28) 0xcd8cfd0c - ithread 6
32 0xc0306980 -1 00010c02 110( 14) 0xcd8d3d0c - ithread 16
32 0xc0305fc0 -1 00010c00 124( 28) 0xcd8d6d88 - ithread 4
32 0xc0306230 -1 00010c00 124( 28) 0xcd8d9d0c - ithread 7
32 0xc0305c80 -1 00010c00 124( 28) 0xcda42d88 - ithread 0
32 0xc02ed240 -1 00040c00 76( 12) 0xcdac2d14 - netisr_cpu 0
32 0xc030f5e0 -1 00040c00 76( 12) 0xcdc60d14 - udp_thread 0
32 0xc030f500 -1 00040c00 76( 12) 0xcde9cd14 - tcp_thread 0
CURCPU 0 CURTHREAD 0xc030d414 (-1) USCHEDCP 0 (-1) UPRI 0
db>
---------------------------------------
Robin P. Blanchard
Systems Integration Specialist
Georgia Center for Continuing Education
fon: 706.542.2404 < > fax: 706.542.6546
---------------------------------------