Re: lost with booting
:-On [20040908 20:12], Matthew Dillon (dillon@apollo.backplane.com) wrote:
:> The boot1/boot2 code can be relocated, at least within its 64KB segment
:> space.
:>
:> You can change the location(s) by setting the BOOT_NEWBOOTLOADER define
:> in /usr/src/sys/boot/i386/bootasm.h. See the top of that file. You
:> can then rebuild the boot code via (from /usr/src/sys/boot):
:
:Are you talking the memory location it loads the boot code in?
:
:Fun part:
:
:copied FreeBSD 4.10's boot0/boot1/boot2/loader onto that DF box, same
:problem.
:
:--
:Jeroen Ruigrok van der Werven <asmodai(at)wxs.nl> / asmodai / kita no mono
I don't think you can put a FreeBSD boot1/boot2 onto a DragonFly
slice and have a result that works. boot1 and boot2 hardwire each
other's load addresses and boot2 is located at a different offset on
a DragonFly slice then on a FreeBSD slice.
What access mode is your BIOS using for that disk? If it isn't set
to LBA mode, try setting it to LBA.
-Matt
Matthew Dillon
<dillon@backplane.com>
討論串 (同標題文章)
完整討論串 (本文為第 15 之 44 篇)：